Abstract:Multiferroic bismuth ferrite (BiFeO3, BFO) is one of the most promising high-temperature ferroelectric and piezoelectric materials due to a high Curie temperature (TC ∼ 825 °C) if the enhancement of ferroelectricity and piezoelectricity can be realized. Unfortunately, it is difficult to adequately pole BFO ceramics due to a high coercive field as well as a high leakage current. Here we investigated the defect dipole-induced poling characteristics and the ferroelectric properties of four kinds of A or/and B-doped BFO ceramics (i.e. BiFeO3, Bi0.95Sm0.05FeO3, BiFe0.95Sc0.05O3, and Bi0.95Sm0.05Fe0.95Sc0.05O3) using a modified quenching technique. The piezoelectric effect is determined by the poling condition, and moreover the poling behavior is strongly dependent on the ion substitution types of BFO ceramics. An enhanced piezoelectric property (d33 = 46–51 pC N−1) can be attained without the involvement of a phase boundary. Specifically, the doping with Sm (Bi0.95Sm0.05FeO3) can cause an obvious threshold during poling, and additionally Bi0.95Sm0.05FeO3 and Bi0.95Sm0.05Fe0.95Sc0.05O3 components can be curiously adequately poled below the coercive field at the poling temperature of 100 °C. In addition, the saturated P–E loops with an obvious internal bias field (Ei) were observed, where Ei was induced by defect dipoles , and then defect dipoles may be decoupled at 120 °C and 6 kV mm−1 (DC field), resulting in a cyclical poling current. It is of great interest to note that an enhanced remanent polarization (2Pr ∼ 50–60 μC cm−2) of the ceramics is obtained, and especially the internal bias fields can be alleviated by AC-cycling or decreasing the measurement frequency. Finally, we believe that our research will have a significant importance in the improvement of piezoelectricity of BFO-based ceramics.

An Analytical Axisymmetric Model for the Poling-History Dependent Behavior of Ferroelectric Ceramics

A Hysteresis Model for Ferroelectric Ceramics with Mechanism for Minor Loops

Extension of the Landau Theory for Hysteretic Electric Dynamics in Ferroelectric Ceramics

A micro-electro-mechanical model for polarization switching of ferroelectric materials

Constitutive Relations of Ferroelectric Ceramics with Electric Fatigue Effects

Phase Field Simulations of the Poling Process and Nonlinear Behavior of Ferroelectric Polycrystals with Semiconducting Grain Boundaries

Role of Grain Orientation Distribution in the Ferroelectric and Ferroelastic Domain Switching of Ferroelectric Polycrystals

Effects of Fatigue and Damage on the Hysteresis Loops of Ferroelectric Ceramics

Three-dimensional finite element modeling of polarization switching in a ferroelectric single domain with an impermeable notch

Modeling of Poling Behavior of Ferroelectric 3–3 Composites

Critical role of domain switching on the fracture toughness of poled ferroelectrics

Modeling of domain switching in ferroelectric ceramics: An example

Poling-induced Inverse Time-Dependent Microstrain Mechanisms and Post-Poling Relaxation in Bismuth Ferrite

Effects of electric fatigue on the butterfly curves of ferroelectric ceramics

The Electric Fatigue and Thermal Effect for Ferroelectric Materials under Cyclic Electric Loading

Reorientation of Defect Dipoles in Ferroelectric Ceramics

Electrical Poling below Coercive Field for Large Piezoelectricity

Studying the Polarization Switching in Polycrystalline BiFeO3 Films by 2D Piezoresponse Force Microscopy

Poling lead zirconate titanate ceramics with the assistance of stress

Defect dipole-induced poling characteristics and ferroelectricity of quenched bismuth ferrite-based ceramics

Mechanism of polarization fatigue in BiFeO 3