Abstract:The shale of the Wufeng–Longmaxi formation in the Sichuan Basin is the preferred layer for shale gas exploration in China, and its petrophysical characteristics are the key to geological and engineering sweet spot prediction. However, the characteristics and impact mechanisms of its acoustic wave velocity and elastic anisotropy are currently unclear. In this paper, the Wufeng–Longmaxi shale is taken as the research object, and the P-wave and S-wave velocities of the samples are tested under the loading and unloading processes of confining pressure. The stress sensitivity variations in parameters such as wave velocity, wave velocity ratio, and anisotropy are discussed. P-wave and S-wave anisotropy parameters are correlated under different pressure conditions. X-ray diffraction, casting thin sections, scanning electron microscopy, micron CT scanning, and other analytical techniques are used to explore the mechanisms of stress sensitivity of elastic parameters. The research results indicate that: (1) the acoustic velocities of samples from different angles are V90° > V45° > V0°, and there is a positive correlation between the wave velocity and the confining pressure. After unloading the confining pressure, irreversible plastic deformation occurs due to the closure of some microfractures in the rock core, causing the wave velocity to be higher than the initial value. (2) The stress sensitivity coefficient of the P-wave (The mean is 3.00 m·s−1·MPa−1) is higher than that of the S-wave (the mean is 1.23 m·s−1·MPa−1), and the stress sensitivity coefficient of the compacted stage (the mean is 3.02 m·s−1·MPa−1) is higher than that of the elastic stage (the mean is 1.21 m·s−1·MPa−1). (3) The anisotropy of the P-wave and S-wave is negatively correlated with the confining pressure. When the confining pressure is loaded to 65 MPa, the change rate of the P-wave anisotropy coefficient is 23%, and its stress sensitivity is higher than that of S-wave anisotropy coefficient (the change rate is 13.7%). After unloading the confining pressure, the degree of anisotropy is reduced due to the closure of some microfractures. The empirical formula of P-wave and S-wave anisotropy parameters under different pressures is established through linear regression, which can provide a reference for mutual predictions. (4) The variation in wave velocity anisotropy with stress can be divided into stress and material anisotropy, which are related to the directional arrangement of microfractures and clay minerals, respectively. The quantitative characterization of shale anisotropy can be realized by evaluating the development degree of reservoir fractures and mineral components, providing a reference for logging interpretations, sweet spot prediction, and fracturing construction of shale gas reservoirs.

Fluid Sensitivity Study of Elastic Parameters in Low-Medium Porosity and Permeability Reservoir Rocks

Study on Sensitivities of Numerical Simulation Parameters in SP Flooding

Fluid Discrimination in Ultra-Deep Reservoirs Based on a Double Double-Porosity Theory

Fluid Identification Based on NMR Apparent Free Water Porosity Inversion: A Case Study of Paleozoic Tight Sandstone Gas Reservoirs in Western Ordos

Laboratory Study of Fluid Viscosity Induced Ultrasonic Velocity Dispersion in Reservoir Sandstones

A seismic elastic moduli module for the measurements of low-frequency wave dispersion and attenuation of fluid-saturated rocks under different pressures

Analysis and Estimation of an Inclusion-Based Effective Fluid Modulus for Tight Gas-Bearing Sandstone Reservoirs

A semi-analytical solution for the transient response of one-dimensional unsaturated single-layer poroviscoelastic media

Effects of pressure and fluid properties on S-wave attenuation of tight rocks based on ultrasonic experiments

Reservoir Fluid Identification Method Incorporating Squirt Flow and Frequency-Dependent Azimuthal Anisotropic Inversion

Geofluid Discrimination in Stress-Induced Anisotropic Porous Reservoirs Using Seismic AVAZ Inversion

Investigation of Water-Sensitivity Damage for Tight Low-Permeability Sandstone Reservoirs

Controlling factors of fluid mobility in the tuff reservoirs of the Huoshiling formation, Dehui fault depression, southeastern Songliao Basin: insights from micro-nano pore structures

On the material constants measurement method of a fluid-saturated transversely isotropic poroelastic medium

Experimental Investigation of Stress Sensitivity of Elastic Wave Velocities for Anisotropic Shale in Wufeng–Longmaxi Formation

Stress dependence of elastic wave dispersion and attenuation in fluid-saturated porous layered media

Fluid Identification Method of Nuclear Magnetic Resonance and Array Acoustic Logging for Complex Oil and Water Layers in Tight Sandstone Reservoir

PP-Wave Reflection Coefficient Equation for HTI Media Incorporating Squirt Flow Effect and Frequency-Dependent Azimuthal AVO Inversion for Anisotropic Fluid Indicator

Characterizing fluid contacts by joint inversion of seismic P-wave impedance and velocity

EXPERIMENTAL STUDY ON COEFFICIENT OF SENSITIVENESS BETWEEN PERCOLATION RATE AND EFFECTIVE PRESSURE FOR LOW PERMEABILITY ROCK

Seismic Attenuation Due to Heterogeneities of Rock Fabric and Fluid Distribution