Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

Stability Analysis on Four-Gimbal Space-Stable Platform

Kinematic Analysis of a Four-Gimbal Space-Stable Platform and Calculation of the Motor Torque

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Kinetostatic characters of parallel 4-DOF platform with 4TPS-PS structure

Dynamics Modeling and Stabilization Analysis of a Two-Axis Gimbaled System

Modeling Analysis on the Gyro Stabilized

Feedback Stabilization of a Two-Axis Gimbal System Via Conservative Stability Analysis

Dynamic Modeling and Coupling Analysis of a Multi-Gimbal Electro-Optical Platform

Variable Structure Zoning Control of a Four-Axis Gyro Stabilized Platform

Kinematics Analysis of Multi-Gimbal Structure for Stabilization and Tracking of LOS

Modeling and Control of a Two-Axis Stabilized Gimbal Based on Kane Method

Discrete Variable Structure Control of Digital Stabilization Loop for Inertial Platform

Experiment Research on Inertia-Aided Adaptive Electronic Image Stabilization of Optical Stable Platform

Robust Control of Magnetically Suspended Gimbals in Inertial Stabilized Platform with Wide Load Range

Experimental Nonlinear Modeling of Velocity Loop in Gyro Stabilized Platform

Multivariable H∞ Control Method Applied to Electro-Optical Platform with Two-Axis Four-Gimbal Configuration

Coupling Analysis and Feedforward Compensation Design of Two-axis Gimbal Controller

Attitude calculation of four-gimbal space-stable platform

The Disturbance Rejection of Magnetically Suspended Inertially Stabilized Platform.

Feedback Stabilization of a Two-axis Gimbal System Via Convex Optimization