Abstract:In the petroleum industry, to solve problems such as the design of the catalytic cracking of heavy oil, correct knowledge of the phase behavior is essential. As a benchmark where the number of degrees of freedom for binary mixtures is zero, the critical end points can represent the type of phase behavior of the binary mixtures according to van Konynenburg and Scott's classification scheme (van Konynenburg, P. H.; Scott, R. L. Philos. Trans. R. Soc. London A 1980, 298, 495-540). Calculating the phase behavior of binary mixtures using interaction parameters evaluated by other methods can cause wrong determinations of the type of phase behavior. The critical end points were employed to fit the interaction parameters for binary mixtures in the critical state at high pressure. The molar Gibbs energy of mixing was evaluated to locate the ranges of values for the interaction parameters where exploration for the critical end point would not fail. The phase behavior at the critical end point is rather complex. Based on the Soave-Redlich-Kwong equation of state, the method developed by Heidemann and Khalil for calculating critical properties (Heidemann, R. A.; Khalil, A. M. AlChE J. 1980, 26, 769-780) was used to compute the critical points. A technique for determining the equilibrium phase of the critical point and thus determining the critical end point, which was difficult to evaluate, using the tangent plane criterion was developed. The developed algorithm was found to be rather stable and to converge rather quickly. The critical end points of different nonpolar, polar, and associating binary mixtures were calculated employing this algorithm. According to the calculation results and the experimental data for the critical end points, the interaction parameters were fitted successfully.

Modification of PSRK mixing rules and results for vapor–liquid equilibria, enthalpy of mixing and activity coefficients at infinite dilution

Prediction of Vapor−Liquid Equilibrium at High Pressure Using a New Excess Free Energy Mixing Rule Coupled with the Original UNIFAC Method and the SRK Equation of State

Modification of co-volume parameter b in mixing rule for calculating vapor liquid equilibrium

NEW WONG-SANDLER-TYPE MIXING RULE

Further development of the PSRK model for the prediction of gas solubilities and vapor-liquid -equilibria at low and high pressures II

Evaluating to Nasrifar-Moshfeghian equation and applying it to vapor-liquid equilibrium

Volumetric Property Improvement for the Soave−Redlich−Kwong Equation of State

A New Modification On Rk Eos For Gaseous Co2 And Gaseous Mixtures Of Co2 And H2o

New Correlation for Binary Interaction Parameters of Paraffins Mixtures

Extension of LCVM-Type Mixing Rule to Three-Parameter Equations of State for Vapor-Liquid Equilibria of Mixtures

Updated versions of the generalized Soave α-function suitable for the Redlich-Kwong and Peng-Robinson equations of state

Prediction of Gas Solubilities in Aqueous Electrolyte Systems Using the Predictive Soave−Redlich−Kwong Model

Extension of Huron-Vidal-type Mixing Rule to Threeparameter Harmens-Knapp Cubic Equation of State

Comparison of Different Mixing Rules in the Calculation of Critical Properties for Binary Mixtures Based on PR Equation of State

Prediction of High Pressure Vapor-Liquid Equilibria Using a New Mixing Rule for the PR Equation of State

Vapor−Liquid Equilibria Predictions for Alternative Working Fluids at Low and Moderate Pressures

The Vapor Liquid Equilibrium Mixing Rules based on Excess Free Energy Models

Modified cubic equations of state by volume translation method

Tuning the interaction parameter for the Soave-Redlich-Kwong equation of state using the critical end points

A modified differential-model for interaction parameters in PR EoS with vdW mixing rules for mixtures containing HFCs and HCs

Prediction of the Critical Properties of Binary Alkanol + Alkane Mixtures Using a Crossover CPA Equation of State