Abstract:The crystal model of NaCl-type FCC-TiC (1− x ) N x was established, and the crystal structure of nonstoichiometric TiC (1− x ) N x was optimized by first-principles calculation method. The binding energy, formation energy, elastic modulus, density of states (DOS) and charge density of TiC (1− x ) N x were calculated. The crystal structure, electronic structure and mechanical properties of TiC (1− x ) N x were studied. The effects of bonding types and bonding properties on the mechanical properties were analyzed. The results show that the optimized TiC (1− x ) N x crystal structure, with the increase in N content, lattice constant and cell volume decrease, TiN crystal structure is easy to form, and its thermodynamics is the most stable. The analysis of B/G, B/C44, Cauchy pressure and Poisson's ratio shows that TiC has the highest brittleness, and TiN has the best toughness, while TiC (1− x ) N x is between TiC and TiN. The covalent bonds are mainly Ti-C and Ti-N bonds, but there are also a certain number of C-N bonds, Ti-C and Ti-N ionic bonds, and Ti-Ti metallic bonds. The doping of N changes the interaction force between the electrons in the metallic d layer and the non-metallic 2p orbital electrons, and also changes the interaction force between the electrons in the metallic bond d layer, thus affecting the hardness and toughness of TiC (1− x ) N x . As C atoms are gradually replaced by C atoms in the TiC (1− x ) N x crystal structure, the density of states at EF gradually increases, which leads to the enhancement of the metal bond Ti d –Ti d , thereby improving the conductivity of the material. The transition from Ti–C bond to Ti–N bond leads to the decrease in covalent bond, the enhancement of ionic property, the increase in hardness and the decrease in toughness. The nonstoichiometric TiC (1− x ) N x powders were synthesized by carbothermal reduction technique, and the lattice constants obtained by XRD were basically consistent with the calculated values. XPS analysis shows that there are Ti–C, Ti–N, C–C and C–N bonds in TiC (1− x ) N x . The experimental results are in good agreement with the calculated electronic structure and bond type, which indicates the reliability of the crystal model and calculation method.

Electronic Structure And Bonding Properties Of Layered Machinable Ti2alc And Ti2aln Ceramics

Electronic and structural properties of the layered ternary carbide Ti3AlC2

First-Principle Study of Structural and Electronic Properties of Ternary Layered Ta2alc

Ab Initio Geometry Optimization and Ground State Properties of Layered Ternary Carbides Ti3mc2 (M = Al, Si and Ge)

Electronic Structure Of Ti2alnb (O Phase)

Phase stability, elastic and electronic properties of Cr2TiAlC2: A new ordered layered ternary carbide

Phase Stability, Mechanical Properties and Electronic Structures of TiAl Binary Compounds by First Principles Calculations

Structures of melt-spun and high-energy ball milled Al3Ti-Mn-Nb intermetallic alloy

An Ab Initio Study of the Electronic Structure and Elastic Properties of the Newly Discovered Ternary Carbide Ti4gac3

Structural, Elastic and Electronic Properties of A New Ternary-Layered Ti2sin

General Trends in the Structural, Electronic and Elastic Properties of the M3AlC2 Phases (M = Transition Metal): A First-Principle Study

First-principle Studies of Properties of Ternary Layered M2PbC (M = Ti, Zr and Hf)

Einfluss von Sc, Y, Ti, Zr, Hf, V, Nb und Ta auf strukturelle und mechanische Eigenschaften von Cr-Al-N-Schichten

Material Properties and Machining Performance of Hybrid Ti 2 AlN Bulk Material for Micro Electrical Discharge Machining

Ab initio study of the bonding and elastic properties of Ti2CdC

Bonding Characteristics of TiC and TiN

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

First-principles calculations to investigate mechanical and thermodynamics properties of multi-anion oxycarbonitride ceramics TiCNO and TiZrCNO

Fast Fabrication and Indentation Behavior of Machinable Ti2AlN Ceramic

High-Pressure Powder X-Ray Diffraction Experiments and Ab Initio Calculation of Ti3alc2

First-principles Study of the Structural and Elastic Properties of Cr2AlX (X=N, C) Compounds