Abstract:The prospect of joining titanium and aluminum components into structures is desirable for a wide range of aerospace and automobile industry applications. One of the problems related with the joining processes for dissimilar metals such as Ti and Al is the formation of residual stress in the bonded joint, which has significant effect on the joint mechanical properties. In this work, joining of a titanium alloy to an aluminum alloy by ultrasonic assisted brazing using a Zn-Al filler metal was investigated. The microstructures of the titanium/aluminum brazed joints were determined by OM, SEM and TEM. The local tensile deformation characteristics of the brazed joints were also examined using the digital image correlation (DIC) methodology by mapping the local strain distribution during in situ tensile tests. The results showed that the Ti7Al5Si12 phase and the TiAl3 phase were formed at the titanium/brazing seam interface. The brazing seam was primarily composed of a Zn-rich phase and a Zn-24.14% Al (mass fraction) eutectoid structure. At the aluminum/brazing seam interface, no interfacial reaction layer was observed and the primary phase Zn-Al dendrites nucleated at the aluminum base metal and grew into the inside of the bonding region. A diffusion layer was formed in the aluminum base metal. It was found that the tensile deformation of the brazed joints was highly heterogeneous, which led to the deflection of the crack during propagating in the joint. The fracture initiated at the Zn-rich phases, where contained the highest stress concentration due to their low elastic modulus, and propagated in the Zn-rich phases or through the interface between Zn-rich phase and Zn-Al eu-tectoid structure.

Research Developments of Ti3Al-Based Alloys and Joining Them to Dissimalar Materials

Research progress in bonding technology for TiAl-based alloy

Advances in TiAl Intermetallics and Its Joining Technology (II) --advances in TiAl Intermetallics

RESEARCH PROGRESS IN BONDING TECHNOLOGY OF TiAl - BASED ALLOY AND STEEL

Recent Achievements and Future Directions of TiAl-Based Intermetallic Compounds

Interfacial Microstructure and Mechanical Properties of Diffusion Bonding of Ti3Al and Ti2AlNb Alloys

Welding and Joining of Titanium Aluminides

Recent Developments in Engineering Γ-Tial Intermetallics

Development and Research Status of Investment Casting TiAl-Based Alloys

Developments in TiAl Based Intermetallics Research

Application and microstructure control of TiAl intermetallics

Research Progress on Additive Manufacturing TiAl Alloy

Research Progress in Preparation of TiAl Interemetallic Based Compound

Current Trends in Dissimilar Diffusion Bonding of Titanium Alloys to Stainless Steels, Aluminium and Magnesium

Interfacial Microstructure and Joining Properties of TiAl/Ti3AlC2 Diffusion Bonded Joints Using Zr and Ni Foils As Interlayer

Research Progress of Titanium Alloys and Their Diffusion Bonding Fatigue Characteristics

Structure and forming process of the Ti/Al diffusion bonding joints

Research status and prospect of dissimilar light alloy welding technology

Strain Field and Fracture Behavior of Ti/Al Dissimilar Alloy Joint under in Situ Tensile Test

Research on characteristics of welding for al/ti dissimilar alloys with trailing ultrasonic

RESEARCH PROGRESS IN BONDING TECHNOLOGY OF TiAl-BASED ALLOYS