D-Q axis Inductance Analytical Calculation for Fractional-slot Distributed Winding IPM Motor based on Big-small Pole Space Method
Baichuan Xu,Kai yang,Feng jiang,Songjun Sun,Yixiao Luo
DOI: https://doi.org/10.1109/tie.2023.3247779
IF: 7.7
2023-01-01
IEEE Transactions on Industrial Electronics
Abstract:The d-q axis inductance is the crucial parameter for the interior permanent magnet (IPM) motor. In order to facilitate the design, analysis, and optimization of IPM motors, it is of great significance to develop an accurate and simplified inductance analytical calculation method. Among the existing calculation methods, the magnetic equivalent circuit (MEC) has advantages in the inductance calculation of the IPM motor due to the simple modeling, the fine processing of the saturation region and the visualization of the magnetic field distribution. However, the traditional MEC method is only applicable to the IPM motor with integer-slot distributed winding (ISDW) or fractional-slot concentrated winding (FSCW), while lacking of in-depth research on fractional-slot distributed winding (FSDW). The magnetic circuit topology of FSDW IPM motors is not as single as that of FSCW/ISDW IPM motors. It leads to problems in the traditional MEC method when dividing the d/q axis flux path in FSDW motors. To solve this problem and expand the applications of MEC method, a big-small pole space (BSPS) method is proposed after fully considering the common characteristics of MMF distribution and reluctance distribution in FSDW motors, which fills the gap of MEC method applied to FSDW motors. The BSPS method divides the d-axis flux path according to the asymmetry of the d-axis magnetomotive force (MMF). Based on the divided flux paths, an improved nonlinear MEC model that considers the saturation of stator and rotor is established to calculate d- and q-axis inductances. The results of finite element analysis (FEA) verify the validity of the proposed MEC model with different geometry parameters. Experimental results of an 84-pole/360-slot FSDW I-type IPM wind generator further confirm the validity of the proposed MEC model
automation & control systems,engineering, electrical & electronic,instruments & instrumentation