Abstract:A laboratory tornado simulator was designed, constructed and tested to generate tornado-like vortices for the purpose of quantifying tornado-induced aerodynamic loads on civil engineering structures. This simulator generates a vortex that can translate along a ground plane to interact with models of structures on the ground. The simulator uses a “rotating forced downdraft” technique that loosely matches the rear flank downdraft (RFD) phenomenon often emphasized as important to tornadogenesis. The rotating forced downdraft is generated using a 1.83 m diameter fan and an annular duct suspended from an overhead crane that can translate along a 10.4 m ground plane. Measurements were conducted to quantify the simulator’s flow structures. An 18-hole pressure probe was used to traverse and map the vortex flow field. The flow structures of the vortices were validated by comparing with mobile Doppler radar observations of two major tornados. Results show that tornado vortex radii from 0.23 to 0.56 m can be generated. A wide range of maximum tangential velocities are also possible (from 6.9 to 14.5 m/s). The simulator generates a range of vortex structures from single-celled vortices to two-celled vortices with corresponding swirl ratios ranging from 0.08 to 1.14. Comparisons of general flow structure and normalized profiles of tangential velocity showed excellent match between simulator and radar data. The range of tornado sizes together with model structures of 1/100 to 1/500 scale will allow extensive examination of tornado-induced wind loads on terrestrial structures. The effects of a tornado’s size, translation speed and detailed flow structure on these loads can now be studied.

CFD Numerical Simulation of Tornado Wind Field Characteristics

The Numerical Simulation for the Wind Fields and Wind Loads Around Spatial Structures

Numerical Simulation of Turbulence in Curved Circular Duct

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

NUMERICAL SIMULATION AND ANALYSIS OF WIND ENVIRONMENT AROUND BUILDING COMPLEX

NUMERICAL SIMULATION OF WIND LOADS AND WIND FLOW FIELD AROUND A SPHERICAL TALL BUILDING

Numerical Simulation of Wind Load on Solar Thermal Power Station with 100 MW Output

AN EXTENDED K-Ε MODEL FOR NUMERICAL SIMULATION OF WIND FLOW AROUND BUILDINGS

A novel three-dimensional analytical tornado model constructed based on force balance analysis

Numerical investigation on tornado-like flows and immersed bodies using vortex models

Physical Study on Tornado-like Flow Based on Tornado Vortex Simulator

An extended kappa-epsilon model for numerical simulation of wind flow around buildings

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Numerical study of flow characteristics of tornado-like vortices considering both swirl ratio and aspect ratio

CFD simulations of steady downbursts and 3D wind velocity empirical models

Design, construction and performance of a large tornado simulator for wind engineering applications

Numerical Study of the Structure and Dynamics of a Tornado at the Sub-Critical Vortex Breakdown Stage

Physically Based Modeling and Animation of Tornado

Characterisation and analysis of indoor tornado for contaminant removal and emergency ventilation

Real Time Simulation of a Tornado

Genesis, Maintenance and Demise of a Simulated Tornado and the Evolution of Its Preceding Descending Reflectivity Core (DRC)