Abstract:Compliance control is required in the applications of robots for assembling, grinding, polishing and human-robot interface, which needs both position control and force control of robots. The impedance control based on joint torque servo is a promising and practical method to realize compliance control in industrial applications. The performance of a joint torque servo controller is thus crucial to the success of compliance control. However, both nonlinear friction torque of the joint motor and varied dynamics of environmental contact during manipulation increase control difficulty greatly. This paper focuses on the compliance control problem and presents a new joint torque servo controller which is a cascading structure including an inner velocity feedback loop and an outer torque control loop. Due to the high signal-to-noise ratio of the motor velocity, an extended state observer is designed to effectively estimate and compensate for the motor friction torque, varied dynamics of environmental contact and other unknown disturbance. And benefiting from the introduction of the efficient and powerful velocity inner loop, the new torque controller performs very well not only in the rigid but also elastic contact environment. Then a standard PD controller is designed in the outer torque loop to produce the control law. Based on the satisfactory joint torque controller, a simplified impedance control algorithm is designed to achieve the force control. Experiments with three other joint torque controllers on a robot manipulator are conducted to demonstrate the proposed joint torque method and the overall force control framework. These results show the proposed joint torque controller can reduce the steady-state error from 3.07 Nm to 0.21 Nm which indicates the joint actuator friction can be eliminated by more than 99%. And a substantial improvement can also be observed in the experiments of force control based on the new joint torque controller.

Learning Compliance Control of Robot Manipulators in Contact with the Unknown Environment

Compliance Control for Standing Maintenance of Humanoid Robots under Unknown External Disturbances.

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Variable Force Tracking Control Via Online Learning

An adaptive compliance position control based on EKF for series elastic actuation

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Impedance Learning for Robots Interacting with Unknown Environments

Learning compliant dynamical system from human demonstrations for stable force control in unknown environments

Learning Impedance Control For Physical Robot-Environment Interaction

Fuzzy-based variable impedance control of uncertain robot manipulator in the flexible environment: A nonlinear force contact model-based approach

Impedance Learning for Human-Guided Robots in Contact With Unknown Environments

Learning-Based Control for Soft Robot–Environment Interaction with Force/Position Tracking Capability

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Learning compliant grasping and manipulation by teleoperation with adaptive force control

Dynamic Hybrid Velocity/force Control of Robot Compliant Motion over Globally Unknown Objects.

Adaptive Interaction Control of Compliant Robots Using Impedance Learning

Model-based Actor-critic Learning of Robotic Impedance Control in Complex Interactive Environment

Adaptive Impedance Control for Compliantly Actuated Robots with a Unified Safety Measure

Unified Method for Task-Space Motion/Force/Impedance Control of Manipulator With Unknown Contact Reaction Strategy

Compliant Control Technology of Manipulator

Approximation-Based Admittance Control of Robot-Environment Interaction With Guaranteed Performance