Abstract:Aiming at addressing the contradiction between the high-speed real-time positioning and multi-channel signal processing in multi-beam sonar systems, in this work we present a real-time multi-beam sonar system based on a Field Programmable Gate Array (FPGA) and Digital Signal Processing (DSP) from two perspectives, i.e., hardware implementation and software optimization. In terms of hardware, an efficient high-voltage pulse transmitting module and a multi-channel data acquisition module with time versus gain (TVG) compensation with characteristics such as low noise and high phase amplitude consistency, are proposed. In terms of algorithms, we study three beamforming methods, namely delay-and-sum (D&S), direct-method (DM) and Chirp Zeta Transform (CZT). We compare the computational efficiency of DM and CZT in the digital domain. In terms of software, according to the transmission bandwidth of the Gigabit Ethernet and a serial rapid IO (SRIO) interface, the data transmission paths of the acquired data and the beam pattern between the FPGA, the DSP, and a personal computer (PC) are planned. A master-slave multi-core pipelined signal processing architecture is designed based on DSP, which enhances the data throughput of the signal processor by seven times as compared with that of the single-core operation. The experimental results reveal that the sound source level of the transmitting module is around 190.25 dB, the transmitting beam width is 64° × 64°, the background noise of the acquisition module is less than 4 μVrms, the amplitude consistency error of each channel is less than -6.55 dB, and the phase consistency error is less than 0.2°. It is noteworthy that the beam number of the sonar system is 90 × 90, the scanning angle interval is 0.33°, the working distance ranges from 5 m to 40 m, and the maximum distance resolution is 0.384 m. In the positioning experiment performed in this work; the 3-D real-time position of the baffle placed in the detection sector is realized. Please note that the maximum deviation of azimuth is 2°, the maximum deviation of elevation is 2.3°, and the maximum distance deviation is 0.379 m.

Design and implementation of the digital system of broad band Doppler velocity measuring sonar based on FPGA

Design and Implementation of a High-Speed Sonar Data Transmission System

FPGA Implementation of High-Speed Data Acquisition System for High-Resolution Millimeter Wave Radar.

High speed video signal acquisition and processing system based on FPGA technique

The Design Of High-Speed Real Time Multi-Channel Sonar Simulation Signal Source Based On Fpga Parallel Technology

Design and Implementation of a Real-Time Multi-Beam Sonar System Based on FPGA and DSP

The Design and Hardware Implementation of OFDM System Receiver Based on FPGA

Multi-Channel Data Acquisition System Based on FPGA and STM32

Doppler Radar Real-Time Signal Processing Based on FPGA

An Implementation Design of Broadband and High Resolution Spectrum Analysis Based on FPGA

All-digital high frequency radar receiver with multi-channels using FPGA

Design of ultrasonic distance measuring module improved by using FPGA

Design about Sampling and Processing System of High-Speed Data for Multi-Laser Beams Measuring System of Wind Fields

Development of FPGA and DSP Based flow rate measurement and control system

High speed data acquisition scheme for beam former with wide band and constant beam width and its implementation

Design of High Speed Signal Process System Based on FPGA

An FPGA-based Direct Sampling and Digital Processing System for Wideband and Narrowband Radar Signal

General Radar Signal Simulation,acquisition and Processing System Based on FPGA

Design of Super Multi-Channel and High-Speed Data Acquisition System Based on FPGA

A Multi-Channel Borehole Strain Measurement and Acquisition System Based on FPGA

Design of High Speed Data Collecting and Processing System in Time Based on FPGA and DSP