Abstract:This paper deals with the initial shape analysis, cutting-pattern analysis, surface accuracy measurement and modal testing of high-precision inflatable antennas reflectors that are intended for spaceflight applications. The initial shape analysis method, formulated on the basis of membrane theory and elastic mechanics, determines the required as-manufactured shape of the reflective surface of the antenna reflector. On the other hand, the cutting-pattern analysis method, with its formulation based on spring-mass representations, numerically calculates the required cutting pattern of the planar membrane gores that are to be assembled to form the 3-dimensional reflective surface. To validate the effectiveness of the proposed analysis methods, a 3.2-m antenna reflector model was designed, manufactured, and assembled for ground demonstration and testing. The reflective surface accuracy of this demonstration reflector model was measured by a photogrammetric measuring system. Shape adjustments of the reflective surface were performed by systematically adjusting the tension in the cables that were used to mount the reflector to its support structure. It was found that the reflective surface accuracy of the reflector model, as defined by its RMS error from a best-fit parabolic shape, was less than 1mm. In addition, dynamic and RF tests were also performed on the demonstration reflector model. The test results indicated that the first-mode frequency of the reflector model agreed well with the corresponding analytical prediction, and its radiation pattern was also well focused.

Orthogonal Elliptical Reflector Design and Analysis of Loading

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Structure design and mechanical measurement of inflatable antenna

Mechanical study on initial profile solution for inflatable reflector made of orthotropic material

The Distortion in Fixing the Swing Mirror Bracket of the Space Solar Telescope

Design And Analysis Of Structure Of Large Aperture Three-Mirror Off-Axis Optical System

Optimization Design For The Supporting System Of 2m Telescope Primary Mirror

Lightweight topological optimization design of scanning mirror

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Design and analysis of flexible support structure for reflectors in remote space sensors

Dynamics Modeling and Wind Load Function Analysis of the Secondary Mirror Support

Thermal Optimum Design for Lightweight Primary Mirror of Space Remote Sensor

Coupled-field analysis and light-weighting design of mirror of space optical systems

Surface Error Analysis of Large Reflecting Mirror under Assembly Fastening Forces

The Design Of Support Structure Of Mirror Subassembly Of Space Remote Sensor

Optimized Design of Lightweight Flat Mirror Based on Isight

Finite Element Analysis of the Deformable Mirror

Structural optimization of a space mirror to selectively constrain optical aberrations

Optomechanical analysis of the mounting performance of large laser transport mirrors

Simulation and Optimal Design for Deformable Mirror Supporting Structure

Analytical method on the design of telescope main rotary frame