Abstract:In this paper, it is proposed to employ phase cancellation metasurface (PCM) to substantially reduce the RCS of an electrically large open-ended cavity (EOC) by scattering the energy to the nonthreatening region, achieving broadband and ultra-wide-angle RCS reduction of the cavity. The PCM, constituted by the collection of polarizing reflectors, is loaded on the inner and outer walls of the composed cavity structure in accordance with the orthogonality principle to obtain a low-RCS cavity. The main benefits of using the polarizing reflector to build a PCM are as follows: On the one hand, it reduces the number of units that make up the PCM, which in principle only requires half of the quantity. On the other hand, it is possible to form a phase difference of 180 degrees that is completely stable. Both the simulation and measured results show that the RCS reduction of 10 dB for normal incidence relative to the original state of the cavity (that is, the metal cavity) over a frequency range of 6.3 GHz to 13.2 GHz under TE polarization and 7.8 GHz to 13.4 GHz under TM polarization has been obtained. Furthermore, the RCS reduction performances of the cavity loaded with the composed PCM under variable azimuth angles are also studied. Numerical and experimental results demonstrate that the ultra-wide-angle RCS reduction from -180 degrees to 180 degrees is acquired. To the best of our knowledge, this is the first time that the PCM, which is made up of a number of polarizing reflectors, has been used to get broadband and ultra-wide-angle RCS reduction for the EOC. This method, which is simple, effective, and low cost, has great application prospects in the RCS reduction design of the cavity.

Improvement on the Forward-backward Iterative Physical Optics Algorithm Applied to Computing the RCS of Large Open-ended Cavities

Improvement of the Mesh Generation for Fast Iterative Physical Optics Calculation

Fast calculation of scattering of dielectric coated electrically large complex cavities

A new iterative physical optics method based on MFIE for computing the RCS (radar cross-section) of electrically large cavities

Computation of the Physical Optics Integral on T-spline Surfaces

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

Computation Of The Rcs Of 3-D Coating Conductor With Arbitrary Shape By Using Fmm And Ibc

The Numerical Steepest Descent Path Method for Calculating Physical Optics Integrals on Smooth Conducting Quadratic Surfaces

IPO: Iterative Physical Optics Image Approximation

Computing the Rcs of Dielectric Coated Objects Using Multilevel Fast Multipole Algrithm: Impedance Boudary Condition Approach

Fast Calculate the RCS of Electrically Large Cavity by IPO+FMM Combined with the GRI and Connection Technology

Efficient Solution To The Rcs Of Trihedral Corner Reflector

A New Hybrid Scheme Of FEBI And PO For Analyzing Inhomogeneous Objects With PEC Plate

A Fast Iterative Physical Optics Method with Quadratic Amplitude and Phase Integral Terms

Tapered Resistive Sheets and FSS Absorber Loading for the Wideband RCS Reduction of the Elliptic Surface at TM Polarization

Design of Broadband and Ultra-Wide-Angle Low-RCS Open-Ended Cavity Based on Phase Cancellation

The Efficient Method for Calculating the Physical Optics Scattered Fields from the Concave Surfaces

An Efficient Volume Integral Equation Method for Analysis of Boresight Error of a Radome with Minor Ablation

A Cylindrical Equivalent Source-Based Physical Optics Method for Rapid Analysis of Airborne Radomes

Efficient Estimation of Ultra-Wideband Scattering Performance from Glossy PEC Objects

Fast Iterative Approach to the Difference Scattering from a Dielectric Target above a Rough Surface