Abstract:Slab geometry is a promising architecture for power scaling of solid-state lasers. By propagating the laser beams along zigzag path in the gain medium, the thermal effects can be well compensated. However, in the non-zigzag direction, the thermal effects are not compensated. Among the overall aberrations in the slab lasers, the major contributors are two low-order aberrations: astigmatism and defocus, which can range up to over 100 microns (peak to valley), leading to detracted beam quality. Another problem with slab lasers is that the output beams are generally in a rectangular aperture with high aspect ratio (normally 1:10), where square beams are favorable for many applications. In order to solve these problems, we propose an automatic low-order aberration compensation system. This system is composed of three lenses fixed on a motorized rail, one is a spherical lens and the others are cylindrical lenses. Astigmatism and defocus can be compensated by merely adjusting the distances between the lenses. Two wave-front sensors are employed in this compensation system, one is used for detecting the initial parameters of the beams, and the other one is used for detecting the remaining aberrations after correction. The adjustments of the three lenses are directly calculated based on beam parameters using ray tracing method. The initial size of the beam is 3.2mm by 26mm, and peak to valley(PV) value of the wave-front is 33.07 lambda(lambda= 1064nm). After correction, the dimension becomes 40mm by 40mm, and peak to valley (PV) value of the wave-front is less than 2 microns.

Laser Output of Radial-Slab Solid-State Laser

Research on Radial Slab Solid-State Laser

Incoherent and Coherent Output for Radial Slab Solid-State Laser

Research on Coherent Beam Combination for Radial Slab Solid-State Laser

Incoherent and Coherent Coupling for Multi-Slab Solid Laser

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Coherent Combining of Two Pulsed Solid State Lasers

Fully Immersing Water-Cooled Radial Slab Laser and Its Incoherent Beam Combination

Nonlinear Generation of a Neat Semi-Gaussian Laser Beam with a Transversely Varying Periodically-Poled LiTaO_3 Crystal

Progress of High-Power Solid-State Slab Lasers

Study on the 400 Mm 4 × 2 Combined Slab Amplifier System

High-quality Near-Field Beam Achieved in a High-Power Laser Based on SLM Adaptive Beam-Shaping System

Modeling of Distributed-Side-pumped Slab Lasers: Power Scaling by Adding Slab Units

Numerical simulation of 30-kW class liquid-cooled Nd:YAG multi-slab resonator

High-power Passively Q-switched Ultra-Thin Slab Lasers

Recent Progresses in Innoslab Lasers and Their Harmonic Generation

High power Solid state Laser with Corner Cube Retro-Reflectors of Mutual-injection Confinement

Design of Diode Pumped All-Solid-state Laser for SLA

Study on symmetry of output beam of corner-pumped solid-state fundamental-mode laser

High-energy Single Longitudinal Mode 1 Ns All-Solid-state 266 Nm Lasers

Automatic Low-Order Aberration Compensator for Solid-State Slab Lasers