Unsteady Flow and Heat Transfer Behavior of Impinging Synthetic Jets: A Phase-Locked Synchronous Measurement
Yi Xu,Yang Xu,Min Hao,Jinjun Wang,Hongwei Ma
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.126029
IF: 5.2
2024-01-01
International Journal of Heat and Mass Transfer
Abstract:The experimental investigation into the influence of both Reynolds number (Resj) and stroke length (L) on flow and heat transfer characteristics of impinging synthetic jets has been conducted using time-resolved particle image velocimetry (PIV) and thermographic phosphor thermometry (TPT). Employing a phase-locked strategy, PIV and TPT have been combined to achieve synchronous measurements of the unsteady flow field and wall temperature. It is found that, in the case of an impinging synthetic jet, the vortex structure's impingement is responsible for wall cooling in the stagnation region, while the radial velocity induced by the vortex structure's spreading contributes to heat removal from the wall in the wall jet region, although the former exhibits superior cooling performance compared to the latter. With an increase in Resj, both the vortex strength and jet velocity of the synthetic jet significantly rise, resulting in a higher cooling coefficient around the stagnation point. Additionally, at a high Resj, both the time-averaged velocity and velocity fluctuation of the wall jet exhibit higher values, leading to a larger effective cooling area, i.e., improved cooling performance. In contrast, the influence of L on the heat transfer characteristics of impinging synthetic jets is considerably less significant compared to Resj. This is attributed to the fact that all stroke lengths (L) in the current study are substantially larger than the threshold of the formation number (L approximate to 4), resulting in the flow field being in a trailing-jet-dominated state.