Abstract:In order to better understand the law of smoke propagation in long channel fires and enhance the fire protection of channel structure with different lining materials, a series of fire simulations were carried out by Fire Dynamics Simulator (FDS) to investigate the impact of wall thermal inertia on the maximum smoke temperature and longitudinal attenuation under the channel ceiling. Five wall materials corresponding from the foam concrete to the steel with thermal inertia ranging from 0.1 to 165 kW 2 •s/(m 4 ·K 2 ) and four heat release rates (5 MW, 7.5 MW, 10 MW and 12.5 MW) were employed. The maximum smoke temperature above the fire source and the temperature distribution under the ceiling along the channel longitudinal centerline were attained and analyzed. The results show that the maximum smoke temperature is significantly affected by the channel wall thermal property and increases with the decrease of wall thermal inertia. Based on the simulative data, a modified model taking the influence of wall thermal inertia into consideration is put forward to predict the maximum gas temperature below the ceiling. Further, the effect of channel wall thermal inertia on the longitudinal smoke temperature decay can be negligible when the thermal inertia is greater than or equal to 1.21 kW 2 •s/(m 4 ·K 2 ), however, the foam concrete wall with the thermal inertia of 0.1 kW 2 •s/(m 4 ·K 2 ) results in a smaller attenuation rate due to less heat conducted into the channel wall. Meanwhile, the smoke temperature distribution along the channel longitudinal centerline is also related to the heat release rate (HRR), and the larger the HRR, the slower the temperature decay. The investigation indicates that the temperature distribution along the longitudinal direction follows an exponential attenuation in the near fire field but presents a form of the sum of two exponential functions in the one-dimensional smoke propagation stage. Then taking the effect of wall thermal inertia and heat release rate into account, two novel models characterizing the law of longitudinal temperature attenuation were developed near fire source and in the one-dimensional smoke spread stage respectively.

Numerical Simulation Study of Stone Curtain Wall Fire

Numerical Simulation on Suppressing Vertical Fire Spread of PMMA by Cornice

Numerical investigation of the vertical combustion characters of three common external wall thermal insulation materials

Numerical Simulation For Blast Analysis Of Insulating Glass In A Curtain Wall

Numerical Case Studies of Vertical Wall Fire Protection Using Water Spray

Numerical Simulation of Asphalt Pavement Temperature Distribution in Long Tunnel Fires

Numerical Study of Polyurethane Foam Fire Between Narrow Vertical Parallel Walls

Numerical Simulation on the Fire Spread in High-Rise Buildings with U-shaped Outside-Facade Structure

Numerical simulation study on suppression effect of water mist on PMMA combustion under external radiant heat flux

Numerical simulation method for blast flow and dynamic response of glass curtain wall

Numerical Study of the Effect of Air Curtains on Smoke Blocking and Leakage Heat Flux in Tunnel Fires

Numerical Simulation Analysis on Temperature Field for Large-space Structures under Fire

Numerical Study on Temperature Distribution of Structural Components Exposed to Travelling Fire

Heat flux and flame spread rate of discrete PMMA in concave building facade with window intervals

Numerical analysis of the behaviour of a concrete floor in a steel-framed structure subject to a traveling fire

Three-dimensional Numerical Simulation for Blast Response of Double Laminated Insulating Glass Curtain Wall

Three-Dimensional Simulation of Condensed Explosive-Induced Flow Propagation and Interaction with Glass Curtain Wall

Numerical Simulation of Combustion Fronts in Porous Media

Numerical study on the impact of wall thermal inertia on maximum smoke temperature and longitudinal attenuation in long channel fires

Numerical simulation on spread of smoke in tunnel when fire takes place outside shield machine

Experimental and numerical studies of fire behavior of cold-formed steel center-sheathed walls subjected to gravity loading