Abstract:Large-scale volumetric fracturing is generally used during shale gas development. The return rate of fracturing fluid is low, and a large amount of slickwater is retained in the reservoir. The adsorption and desorption of partially hydrolyzed polyacrylamide (HPAM), an additive commonly used in slickwater, on the surface of shale was studied using Longmaxi shale from the Sichuan Basin. The experimental results showed that the mass ratio of the HPAM solution to shale reached saturation adsorption at 20:1 when the concentration of HPAM solution was 1000 mg/L and 25:1 when the concentration of HPAM solution was 500 mg/L. The mass ratio of the HPAM solution to shale was fixed at 25:1, and the adsorption equilibrium was reached at a HPAM concentration of 1000 mg/L when the aqueous solution temperature was 30 °C and 800 mg/L when the aqueous solution temperature was 60 °C. The Langmuir adsorption model yielded a better fit than the Freundlich adsorption model. The adsorption equilibrium time at 30 °C was at 60 min for a HPAM concentration of 500 mg/L, while for a concentration of 1000 mg/L, it was at 90 min. The adsorption equilibrium time at 60 °C was 40 min for a HPAM concentration of 500 mg/L, whereas it was 60 min for a HPAM concentration at 1000 mg/L. The pseudo-second order (PSO) kinetics model yielded better fits than the pseudo-first order (PFO) kinetics model. The adsorption of HPAM on shale was strong, and the adsorbed HPAM resembled cobwebs adhering to the shale surface. HPAM on the surface of shale after adsorption was able to resist the desorption capacity of water. However, when the amount of adsorbed HPAM on shale increased significantly, the amount of residual HPAM on the surface of the shale decreased rapidly during desorption in deionized water. The desorption of HPAM on the shale surface followed a modified desorption model. The higher the concentration of HPAM adsorbed on the shale surface was, the easier it was to desorb and the easier it was to be removed from the shale.

Determination of Hydrolytic Degree,Mole Mass and Concentration of Hydrolyzed Polyacrylamide in Oily Wastewater

Rheological study of the crosslinking reaction between polyacrylamide and Cr(III): I. Effect of concentration

Evaluation of highly stable ultrahigh-molecular-weight partially hydrolyzed polyacrylamide for enhanced oil recovery

Synthesis and characterization of hydrophobically associating cationic polyacrylamide

Study on Activated Sludge Treatment of Polyacrylamide Wastewater from Oilfield

Effect of hydrolysis degree of hydrolyzed polyacrylamide grafted carboxymethyl cellulose on dye removal efficiency

Determination of Residual Acrylamide Monomer in Medical Polyacrylamide Hydrogel by HPLC-SPE

Mutagenicity of enantiomers of penbutolol.

Effect of degree of hydrolysis of polyacrylamide on the micromorphology of its solution

Demulsification law of polyether demulsifier for W/O crude oil emulsion containing hydrophobically modified polyacrylamide in water

Optimization of and Mechanism for the Coagulation–flocculation of Oil-Field Wastewater from Polymer Flooding

Adsorption-desorption behavior of the hydrophobically associating copolymer AM/APEG/C-18/SSS

The effect of polymer on the floatation-flocculation performance of flocculant for treating polymer flooding produced water

[Effects of Polyacrylamide on Settling and Separation of Oil Droplets in Polymer Flooding Produced Water].

Synthesis of hydrophobically modified flocculant by aqueous dispersion polymerization and its application in oily wastewater treatment

Synthesis of cationic polyacrylamide via inverse emulsion polymerization method for the application in water treatment

A Quantitative Approach to Determine Hydrophobe Content of Associating Polyacrylamide Using a Fluorescent Probe

Adsorption and Desorption Behavior of Partially Hydrolyzed Polyacrylamide on Longmaxi Shale

Removal of emulsified oil from water using hydrophobic modified cationic polyacrylamide flocculants synthesized from low-pressure UV initiation

Preparation of a selective flocculant for treatment of oily wastewater produced from polymer flooding and its flocculant mechanism

A New Macromolecular Flocculant in the Treatment of Oily Wastewater in Oilfields