Abstract:In the context of global warming and demanding alternative refrigerants, the transcritical CO 2 refrigeration cycle was considered a potentially energy-saving and carbon-reducing technology. The use of CO 2 mixtures with higher critical temperatures and lower critical pressures has been demonstrated as an effective way to improve the performance of transcritical CO 2 refrigeration cycles. To achieve this approach, accurate critical locus parameters are needed for establishing cross-over state equations and calculating thermodynamic properties in the near-critical region. Currently, experimental methods are the most effective way to obtain high-precision critical locus parameters of mixtures. In this work, the critical properties including critical temperature, critical pressure, critical density, and mole fraction of the R744 (carbon dioxide) + R1234ze(E) (trans-1,3,3,3-tetrafluoropropene) binary mixture were measured according to a variable-volume method with a metal-bellows volumeter. The critical point was determined by visual observation of the critical opalescence and reappearance of the vapor-liquid meniscus. The combined expanded measurement (relative) uncertainties of the critical temperature, critical pressure, critical density, and mole fraction were within 50 mK, 0.021 MPa, 0.6%, and 0.012 ( k =2, 0.95 level of confidence), respectively. After comparing the fitting results of the Modified Chueh-Prausnitz (MCP) method, the Modified Wilson (MW) method, and the Redlich-Kister (RK) method. We recommended the Modified Wilson method to correlate the critical properties of the binary system of R1234ze(E)+R744. Our research showed that R1234ze(E)+R744 mixture can achieve a higher critical temperature and critical density simultaneously and a lower critical pressure compared with pure CO2 when the composition of R744 is less than 0.23.

Prediction of Saturated Vapor Density of Refrigerant Mixtures

Prediction of Saturated Liquid Density of Refrigerant Mixtures

Prediction of saturated liquid enthalpy of refrigerant mixtures

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

PREDICTION OF THE LATENT HEAT OF REFRIGERANT MIXTURES

Development and Stability Verification of a Measuring Installation of Saturation Liquid Density

Investigation on Liquid Density Data at the Bubble Point and Equations for the Refrigerant Hfc-404a over A Wide Temperature Range

A practical density equation for saturated vapor of helium-3 from 0.01 K to the critical point

Prediction of Vapor–liquid Equilibria Properties of Several HFC Binary Refrigerant Mixtures

PREDICATION OF SATURATED VAPOR PRESSURE OF NON-AZEOTROPIC MIXTURES UP TO THE CRITICAL REGION

An improved prediction equation of refrigerants surface tension based on the principle of corresponding states

A Corresponding State Equation for Compressed Liquid Isochoric Heat Capacity of Pure and Mixture Refrigerants

Calculation Model of Thermodynamic Properties of Saturated Liquid for HFC-32 Refrigerant

New Correlation of the Temperature-Dependent Thermal Conductivity of Binary Saturated Refrigerants Mixtures

Saturated Liquid Density Equation for Pure Refrigerants Including CFCs, HCFCs, HFCs, HCs, HFOs, HFEs, PFAs and ISs Based on the Scaling Law and the Law of Rectilinear Diameter

Vapor–Liquid Equilibrium Prediction of Refrigerant Mixtures with Peng–Robinson Equation of State and Binary Interaction Parameters Calculated Through Group Contribution Model

Prediction equation for viscosities of some liquid refrigerant mixtures

Prediction of Vapor Pressure of Refrigerants Based on a Modified Corresponding State Equation

A Generalized Simple Model for Saturated Thermodynamic Properties of Refrigerants

The p-V-T Relationship of Liquid Phase, Dew and Bubble Point Pressures and Densities of Binary Mixtures

Measurement of critical properties for the binary mixture of R744 (carbon dioxide) + R1234ze(E) (trans-1,3,3,3-tetrafluoropropene)