Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

Internal clusters in crystalline phases related to Zr-based bulk amorphous alloys

Ab Initio Calculations of the Thermodynamics and Phase Diagram of Zirconium

Crystallization of high stable Zr55Al10Ni5Cu30 bulk amorphous alloy

Crystallization of Amorphous Zr60Al15Ni25 Alloy

Phase Separation of Zr-Ti-Cu-Ni-Be Bulk Amorphous Alloy During Isothermal Annealing

Theoretical Investigation of the Phase Stability and Elastic Properties of TiZrHfNb-based High Entropy Alloys

Crystallization Behavior of Zr55al10ni5cu30 Amorphous Alloys with Different Morphologies and Thermal History Conditions

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

Enthalpies of Formation and Crystallization of Amorphous Zr1-xAlx and Zr1-xNix Alloys: Calculations Compared with Measurements

Bergman-type medium range order in amorphous Zr77Rh23 alloy studied by ab initio molecular dynamics simulations

Study on isothermal crystallization kinetics of Zr55.7Cu22.4Ni7.2Al14.7 bulk amorphous alloy

Relationship between the precipitation of face-centered cubic Zr2Ni phase and the stability of supercooled liquid state in Zr-Cu-Ni-Al metallic glasses : Special issue on bulk amorphous, nano-crystalline and nano-quasicrystalline alloys

Crystallization behaviors of ZrCuNiAlTi4 bulk amorphous alloy during continuous heating

The geometry, electronic and magnetic properties of ZrnNi (n = 2-14) clusters: A first-principles jointed particle-swarm-optimization investigation

The Structural, Electronic, Magnetic and Mechanical Properties of Quaternary Heusler Alloys Zrticrz (Z = Al, Ga, In, Si, Ge, Sn): A First-Principles Study

A method locating Cu-Ti-based glass formers using Ni-Zr binary clusters

Thermal Stability of Zr55Al10Ni5Cu30 Bulk Amorphous Alloy During Continuous Heating and Isothermal Annealing

First-principles Study of the Structural, Electronic and Elastic Properties of Ternary Zr2AN (a=ga, in and Tl)

Icosahedral Ordering Induced by Cr in Al–Zn Alloy Liquid

Abnormal Alloying Behaviour Observed in an Immiscible Zr–Nb System

Structure, short-range order, and phase stability of the Al x CrFeCoNi high-entropy alloy: insights from a perturbative, DFT-based analysis