Abstract:A novel composite anode material consisted of electrodeposited Sn dispersing in a conductive micro-porous carbon membrane, which was directly coated on Cu current collector, was investigated. The composite material was prepared by: (1) casting a polyacrylonitrile (PAN)/dimethylformamide (DMF) solution that contained silica particles on a copper foil, (2) removing the solvent by evaporation, (3) dissolving the silica particles by immersing the copper foil into an alkaline solution, (4) drying the copper foil coated by micro-porous membrane, (5) electrodepositing Sn onto the copper foil through the micro-pores in the micro-porous membrane, and (6) annealing as-obtained composite material. This method provided the composite material with high decentralization of Sn and supporting medium purpose of conductive carbon membrane deriving from pyrolysis of PAN. SEM, XRD and EDS analysis confirmed this structure. The characteristic structure was beneficial to inhibit the aggregation between Sn micro-particles, to relax the volume expansion during cycling, and to improve the cycleability of electrode. Galvanostatic tests indicated the discharge capacity of the composite material remained over 550 mAh g−1 and 71.4% of charge retention after 30 cycles, while that of the electrode prepared by electrodepositing Sn on a bare Cu foil decreased seriously to 82.5 mAh g−1 and 13%. These results show that the composite material is a promising anode material with larger specific capacity and long cycle life for lithium ion batteries.

Soft Chemical Synthesis and Electrochemical Properties of Tin Oxide-Based Materials As Anodes for Lithium Ion Batteries

Phase-tailored synthesis of tin oxide-graphene nanocomposites for anodes and their enhanced lithium-ion battery performance

One-Pot Synthesis of High-Performance Tin Chalcogenides/C Anodes for Li-Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries

An Elaborate Strategy for Fabricating One-Dimensional Quasi-Hollow Nanostructure of Tin Dioxide@carbon Composite with Improved Lithium Storage Performance

Facile synthesis of tin dioxide-based high performance anodes for lithium ion batteries assisted by graphene gel

A simple fabrication of porous carbon@tin dioxide as anode material for achieving lithium-ion batteries with high performance

Sodium chloride template synthesis of cubic tin dioxide hollow particles for lithium ion battery applications.

The one-step preparation and electrochemical characteristics of tin dioxide nanocrystalline materials

Mesoporous tin oxides as lithium intercalation anode materials

SnO X /graphene Anode Material with Multiple Oxidation States for High-Performance Li-ion Batteries.

Monodisperse Tin Nanoparticles and Hollow Tin Oxide Nanospheres As Anode Materials for High Performance Lithium Ion Batteries

Electrochemical Performance Studies of Tin Oxide Prepared by Sol-Gel

SnO2 prepared by ion-exchange method of sodium alginate hydrogel as robust anode material for lithium-ion batteries

The self-assembly of porous microspheres of tin dioxide octahedral nanoparticles for high performance lithium ion battery anode materials

Advanced Structures in Electrodeposited Tin Base Anodes for Lithium Ion Batteries

Tin Antimony Oxide @graphene As a Novel Anode Material for Lithium Ion Batteries

Preparation and performance of tin alloy film anode materials for lithium-ion battery

Research Progress of Tin-Metal Oxide Composite for Anode Materials in Lithium Ion Batteries