Abstract:Abstract During xerographic printing processes, the electric charge properties of the paper surface are essential to obtain effective toner transfer and high image quality. Surface and volume resistance are indispensable to the accumulation of the surface charge and different resistance values generate different electrical fields with optical drum, and have a significant effect on toner transfer efficiency. In this paper, surface sizing was investigated to improve the surface properties for better toner transfer and image quality. Styrene acrylate emulsion (SAE) latex was successfully synthesized and fully characterized with a Fourier transform infrared (FT-IR) spectrometer, a laser particle analyzer and a scanning electron microscope (SEM). The results showed that under the conditions of emulsifier dosage at 3 wt%, initiator concentration at 0.5 wt% and the reaction temperature at 80°C, the monomer conversion can reach 80%. The effects of various factors including initiator dosage, emulsifier dosage and monomer ratio on the sizing performance were studied. The effects of different ratios of SAE to starch on surface and volume resistance of paper were also systematically investigated. The differences in electric properties of various paper samples were quantified and their influence on paper-toner adhesion and print quality was clarified. Relationships between electrical properties of paper and paper-toner adhesion force, and thus print quality were established. Strategies to improve printing performance through effective control of paper electrical properties were also developed. It is concluded that the best printing quality and toner adhesion were achieved when the ratio of SAE to starch is between 1:10 and 2:10.

Preparation and Application of a Soap-free Emulsion Based on Styrene Acrylate Copolymer as a Surface Sizing Agent

Synthesis Of Cationic Surface Sizing Agent And Its Application

Preparation and Application of a New-type ASA Emulsifier

Preparation and Application of an ASA New-Type Emulsifier PDAVM

Soap-Free Emulsion Polymerization of Styrene Using Macro-RAFT Agent to Make Cationic Latex

Application of reactive fatty alcohol ether sulfosuccinate emulsifier in surface sizing

Preparation and Application of Fluoroacrylate Copolymer Emulsion As Surface Sizing Agent

Preparation of starch-based styrene acrylate emulsion used as surface-treatment agent for decorative base paper

Surface Enrichment by Conventional and Polymerizable Sulfated Nonylphenol Ethoxylate Emulsifiers in Water-Based Pressure-Sensitive Adhesive

Preparation and Properties of Soapless Poly(styrene–butyl Acrylate–acrylic Acid)/sio2 Composite Emulsion

Preparation and Characterization of Surface Sizing Agent of Chitosan Graft Styrene-butyl Acrylate Copolymer

Synthesis of bio‐based modified amphoteric acrylate epoxy emulsion surface sizing agent via RAFT polymerization

Preparation of Styrene/Acrylic Latex Surface Sizing Agent Modified with Montmorillonite

Sythesis and Properties of St/BA Soap-Free Emulsion

Characterization and Particle Size Control of Acrylic Polymer Latex Prepared with Green Surfactants

The synthesis of styrene acrylate emulsion and its application in xerographic paper

Preparation and Performance of Organic Silicon Surface Sizing Agent

Preparation and Performance of Styrene-Acrylate Emulsion with High Damping Property

Study on Preparation of a Non-Solvent Sizing Agent for Paper Surface Based on Waste Polystyrene Foam

Study of Appication of Polymer Emulsifer in Acrylic-Styrene Soap-Free Emulsion Polymerization

Preparation of Graft Copolymer Onto Starch and Its Performance in Surface Sizing