Abstract:The objective of this study was to develop a methodology for quantifying the influence of geogrid on the performance of flexible pavement structures in a manner that would allow incorporation into Pavement Mechanistic-Empirical (ME) Design. The finite element technique was used to develop the geogrid-reinforced flexible pavement structure models, which focused on the characterization of the lateral confinement and vertical membrane effect of geogrid. A full-scale Soil Tank test was conducted to assess the validity of the developed geogrid-reinforced models by comparing the model predicted pavement responses (i.e., surface deflections, tensile strain at the bottom of asphalt concrete, and vertical stress distributions) to those tank test measurements. In general, the developed finite element models were capable of accurately predicting the responses of geogrid-reinforced and unreinforced pavement structures. It was found that the placement of geogrid increases the stiffness of base course and significantly reduces the vertical stresses around the geogrid layer, but cannot effectively reduce the tensile strain at the bottom of asphalt concrete. This indicated that the geogrid reinforcement is beneficial for reducing the rutting damage in base course and subgrade, but not effective in prolonging the fatigue life of flexible pavement. To quantify the influence of geogrid, the geogrid-reinforced flexible pavement structure was equivalent to an unreinforced flexible pavement structure with the modified material properties, which was based on a pavement response equivalency approach. The determined modified material properties was then input into Pavement ME Design software to predict the performance of geogrid-reinforced flexible pavement structures. Two case studies were conducted to predict the performance of two geogrid-reinforced pavement sections that were identified from the Long-Term Pavement Performance (LTPP) database. The predicted performance results (i.e., rutting depth and fatigue cracking area) were coincident with those field measurements, which validated the prediction accuracy of the proposed approach.

Finite Element Computation and Optimization Design of Netty Polyester Pavement

Mechanical Analysis of the Effect of Overloading on Pavement Performance

Modeling Stress-Dependent Anisotropic Elastoplastic Unbound Granular Base in Flexible Pavements

Elastoplastic Analysis of Asphalt Concrete Pavement

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Modeling of Unsaturated Granular Materials in Flexible Pavements

A Simplified Planar Model for Geosynthetics Reinforced Composite Foundation Subjected to Vertical Load

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

Numerical Analysis on Deformation of Pavement and Soft Clay Ground Interaction for Cyclic Loads

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Airport pavement design considering areal load distribution

Elasto-viscoplastic FEA of Reinforced Pavements under Traffic Loading

Field Test Study on the Improvement Mechanism of Pile-Net Composite Foundation

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Influence of Horizontal Loads on Composite Pavement Overlay

A Finite Element Model for Simulating Stress Responses of Permeable Road Pavement

Pavement Structure Optimization Analysis of Basalt Fiber High Modulus Asphalt Mixture