Abstract:This study focuses on investigating the influence of Si/Al ratio on the performance of hydrothermally aged Cu/SSZ-13 catalysts prepared by in situ hydrothermal synthesis method. It was found that NH3-SCR performance and hydrothermal stability of Cu/SSZ-13 decreased with increasing Si/Al ratio. Fresh and hydrothermally aged Cu/SSZ-13 with Si/Al ratio of 6.5 showed the best SCR activity and N-2 selectivity in a broad temperature of 200-500 degrees C, in which more than 90% NOx was reduced with superior N-2 selectivity above 95%. The effect of Si/Al ratio on the properties of the physicochemical structure, the change of acidity intensity, and Cu species migration or transformation of the fresh and aged Cu/SSZ-13 catalysts were comprehensively characterized by NH3-TPO, NH3-TPD, H-2-TPR, N-2 physisorption, XRD, ICP-AES, and XPS. The increase of the surface CuO species, the decrease of the amount of Cu2+ in active sites, the chemisorption NH3 species, the specific surface area, the total pore volume, and the increase of average pore diameter, may be the main reasons for performance deterioration over high-Si/Al-ratio catalysts after hydrothermal aging. Furthermore, in situ DRIFTS indicate that, with the increasing Si/Al ratio, the zeolitic structure was easy to collapse, and that the surface acid sites, the active copper species, as well as the adsorbed surface nitrate, decreased after hydrothermally aged. After hydrothermal aging, the amount of isolated Cu2+ decreased, and more CuO species were aggregated, mainly coming from the conversion of the unstable isolated Cu2+ species in D6R or CHA cages. The decrease of isolated Cu2+ and CuO species aggregation were significant in Cu/SSZ-13 with high Si/Al ratios. The CuO leaded to the instability of the SSZ-13 skeleton structure and NH3 oxidation promotion, resulting in catalysts deactivation.

The Effect of the Si/Al Ratio on the Photoluminescence Properties of Cu(I)SAPO-5 Catalysts

Cu1.94S Nanocrystal Superstructure for Photocatalytic Hydrogen Evolution

Effect of Si/Al Ratio of Mesoporous Support on the Structure Evolution and Catalytic Performance of the Cu/Al-HMS Catalyst

Effects of SiO2/Al2O3 ratio of ZSM-5 zeolite on photocatalytic performance of TiO2/ZSM-5

Investigations on the effect of Mn ions on the local structure and photocatalytic activity of Cu(I)-ZSM-5 catalysts.

Effects of Ag Nanoparticles on the Visible-Light-driven Photocatalytic Properties of Cu2O Nanocubes

Preparation of SiO2@Au@TiO2 Core–shell Nanostructures and Their Photocatalytic Activities under Visible Light Irradiation

Catalytic Decomposition of N2O over Cu-ZSM-11 Catalysts

Synthesis and visible-light photocatalytic property of spinel CuAl2O4 for vehicle emissions

Probing the effect of Si/Al ratio in Cu-CHA zeolite catalyst on SO2 exposure: in situ DR UV-vis spectroscopy and deactivation measurements

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

In-situ synthesis of Cu-SSZ-13 catalyst: effect of Si/Al ratio on catalytic performance for NH3-SCR

Efficient Photocatalytic Performance Enhancement in Co-doped ZnO Nanowires Coupled with CuS Nanoparticles

Enhanced photocatalytic performance of Co3(PO4)2/Ag3PO4 immobilized on SiC: The synergistic effects and mechanism

Synergistic Effect in Plasmonic CuAu Alloys as Co-Catalyst on SnIn4S8 for Boosted Solar-Driven CO2 Reduction

Preferential carbon monoxide oxidation on Ag/Al-SBA-15 catalysts: Effect of the Si/Al ratio

A study of Cu-Mn/SiO2 catalysts for methanol synthesis

Effect of copper source on the structure–activity of CuAl2O4 spinel catalysts for CO hydrogenation

Preparation, structural characterization and catalyst activity of CuO-MnO2/Al2O3 catalysts

Theoretical investigation of Cu5/silicates deposited on rutile TiO2 as a photocatalyst

Cu/SSZ-13 Zeolites Prepared by in Situ Hydrothermal Synthesis Method As NH3-SCR Catalysts: Influence of the Si/Al Ratio on the Activity and Hydrothermal Properties