Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

A Simulation Design Based on Lab VIEW for a Water Wave Energy Mooring System

Research on the Underwater AUV Docking Station with Two Swing Degrees of Freedom

Modeling and Simulation of AWS Based Wave Energy Conversion System

A Virtual Online Simulator Design for the Docking of Unmanned Underwater Vehicle

Virtual-reality-based Online Simulator Design with a Virtual Simulation System for the Docking of Unmanned Underwater Vehicle

Simulation of Deployment Process of Junction Box

Design of surface vessel EW simulating training system

A CIP-based Numerical Simulation of Wave Interaction with a Fluid-Filled Membrane Submerged Breakwater

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Motion Control and Visual Simulation of Four Rotor Submarine

Numerical Simulation of Wave Interaction with Coastal Structures Using a CIP-based Method

Virtual model testing method for deepwater floating system

Design and Analysis of a Mooring System for a Wave Energy Converter

A unified simulation framework for wave energy powered underwater vehicle docking and charging

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

Design of a Load Simulation System for Underwater Towed Heave Compensation System

Design of Semi Physical Simulation Platform for Autonomous Underwater Vehicle

Design and Implementation of Autonomous Underwater Vehicle Simulation System Based on MOOS and Unreal Engine

A fully coupled dynamic water-mooring line system: Numerical implementation and applications

An Interactive Simulation Platform Design For Analyzing Ship Steer System

Design and Implementation of a Modular UUV Simulation Platform