Prussian Blue Mesocrystals Prepared by a Facile Hydrothermal Method

Ming Hu,Ji-Sen Jiang,Rui-Ping Ji,Yi Zeng

DOI: https://doi.org/10.1039/b911613n

IF: 3.756

2009-01-01

CrystEngComm

Abstract:Prussian Blue (PB) mesocrystals have been prepared by a facile hydrothermal method directly. PB nanoparticles aggregate together in an oriented way to form a hierarchical structure.

What problem does this paper attempt to address?

Prussian Blue Mesocrystals: an Example of Self-Construction

Ming Hu,Ji-Sen Jiang,Chu-Cheng Lin,Yi Zeng

DOI: https://doi.org/10.1039/c003523h

IF: 3.756

2010-01-01

CrystEngComm

Abstract:Prussian blue mesocrystals have been fabricated by a PEG-assisted hydrothermal method. Sub-microcubes and nanocrystals serve like multiple-scale building blocks to assemble into mesocrystals.
Prussian Blue Microcrystals Prepared by Selective Etching and Their Conversion to Mesoporous Magnetic Iron(iii) Oxides

Ming Hu,Ji-Sen Jiang,Yi Zeng

DOI: https://doi.org/10.1039/b917702g

IF: 4.9

2010-01-01

Chemical Communications

Abstract:A new morphology of Prussian blue microcrystals has been prepared by selective etching. By thermal decomposition, PB has been transformed into mesoporous magnetic iron(III) oxide.
Preparation of Various Prussian Blue Analogue Hollow Nanocubes with Single Crystalline Shells

Ming Hu,Nagy L. Torad,Yusuke Yamauchi

DOI: https://doi.org/10.1002/ejic.201200654

IF: 2.551

2012-01-01

European Journal of Inorganic Chemistry

Abstract:We report the preparation of monocrystalline Prussian blue (PB) analogue hollow nanocubes by applying a controlled chemical etching method with assistance of polyvinylpyrrolidone (PVP). The hollow particles obtained possess the original single-crystalline structures, with retention of the high surface areas. Our synthetic route based on chemical etching is quite simple, and it can be scaled up for mass production.
Ultralight Mesoporous Magnetic Frameworks by Interfacial Assembly of Prussian Blue Nanocubes.

Biao Kong,Jing Tang,Zhangxiong Wu,Jing Wei,Hao Wu,Yongcheng Wang,Gengfeng Zheng,Dongyuan Zhao

DOI: https://doi.org/10.1002/anie.201308625

2014-01-01

Abstract:A facile approach for the synthesis of ultralight iron oxide hierarchical structures with tailorable macro- and mesoporosity is reported. This method entails the growth of porous Prussian blue (PB) single crystals on the surface of a polyurethane sponge, followed by in situ thermal conversion of PB crystals into three-dimensional mesoporous iron oxide (3DMI) architectures. Compared to previously reported ultralight materials, the 3DMI architectures possess hierarchical macro- and mesoporous frameworks with multiple advantageous features, including high surface area (ca. 117 m(2) g(-1)) and ultralow density (6-11 mg cm(-3)). Furthermore, they can be synthesized on a kilogram scale. More importantly, these 3DMI structures exhibit superparamagnetism and tunable hydrophilicity/hydrophobicity, thus allowing for efficient multiphase interfacial adsorption and fast multiphase catalysis.
Characterization of Prussian Blue Nanoparticles Prepared by Reverse Micelle and Electrochemical Study of Their Assembly

Jingxia Qiu,Jiwei Liu,Kai Sun,Yuqing Miao

DOI: https://doi.org/10.1142/s0218625x09013001

2009-01-01

Surface Review and Letters

Abstract:Well-dispersed Prussian blue (PB) nanoparticles were successfully prepared by reverse micelle. This method is based on one-step rapid formation in different sizes of nano-pool with water/oil system, which leads to a homogeneous distribution of PB nanoparticles. Scanning electronic microscopy, UV–vis, and Fourier infrared spectra give supportive evidence of PB nanoparticles. Electrochemical study shows that PB nanoparticles are modified onto cysteine-assembled Au electrodes and exhibit high efficiency of electron transfer.
Fabrication and electrochemical study of monodisperse and size controlled Prussian blue nanoparticles protected by biocompatible polymer

Qian Zhang,Ling Zhang,Jinghong Li

DOI: https://doi.org/10.1016/j.electacta.2007.11.031

IF: 6.6

2008-01-01

Electrochimica Acta

Abstract:Monodisperse and size controlled Prussian blue (PB) nanoparticles have been synthesized using chitosan as protective matrix. The method depends on electrostatic interactions of Fe(CN)63− ions with cationic chitosan macromolecules followed by the reaction with FeCl2. The observation of transmission electron microscope (TEM) showed that the diameter of these monodisperse nanoparticles ranged from 5 to 20nm with different chitosan contents. X-ray diffraction (XRD) analysis further identified a face-centered cubic structure of the nanoparticles. Investigations of optical properties of nanoparticles were also conducted with Fourier transform infrared (FT-IR) and Ultra violet/visible (UV–vis) spectroscopy. Moreover, cyclic voltammetry (CV) demonstrated that the chitosan-PB nanoparticles kept their intrinsic electrochemical properties and electrocatalytic activity towards hydrogen peroxide. This method represents a new route for preparing biocompatible Prussian blue nanoparticles that offers control over the size and protection against aggregation.
Synthesis and Characterization of Organometallic Coordination Polymer Nanoshells of Prussian Blue Using Miniemulsion Periphery Polymerization (Mepp)

Guodong Liang,Junting Xu,Xiaosong Wang

DOI: https://doi.org/10.1021/ja900516a

IF: 15

2009-01-01

Journal of the American Chemical Society

Abstract:We report a conceptually new method for the synthesis of Prussian blue (PB) nanoshells with tunable size using miniemulsion periphery polymerization (MEPP). The process of MEPP involves the preparation of miniemulsion droplets using organometallic surfactants, followed by a coordination polymerization at the periphery of the droplets. The organometallic polymers with nanoshell structure were confirmed by using FT-IR, UV-vis, TEM, SEM, and AFM. WAXD measurements indicated that the shell structure suppressed the crystallization of the polymers. We also discovered that the nanoshell structure can significantly enhance the thermal stability of the materials. The hollow structures plus inherent magnetic properties of PB render the materials potential useful as multifunctional capsules.
Controllable Synthesis and Formation Mechanism Investigation of Prussian Blue Nanocrystals by Using the Polysaccharide Hydrolysis Method

Ya Ding,Yu-Lin Hu,Gang Gu,Xing-Hua Xia

DOI: https://doi.org/10.1021/jp905704c

2009-01-01

Abstract:Very controllable synthesis of cyanometallate-based coordination nanomaterials has been achieved by the hydrolysis reaction of polysaccharide (e,g., chitosan) in an acidic single precursor (i.e., potassium ferricyanide) solution. By controlling the hydrolysis rate of chitosan, Prussian blue (PB) nanoparticles and nanocubes with different sizes have been prepared via the rapid-seeding creation and long-time growth processes, respectively. The PB formation mechanism via the reducing effect of the hydrolysis product of chitosan and oxidation of the Prussian white intermediate in the solution was confirmed by Ultraviolet-visible (UV-vis), Fourier transform infrared (FT-IR), and transmission electron microscopy (TEM) measurements. The size- and structure-dependent magnetic property of PB was also investigated. The present approach allows simple and controllable preparation of transition metal hexacyanoferrate nanocrystals and is promising for the study of unique shape-, size-, and structure-dependent properties for optoelectronic, magnetic, and electrocatalytic applications.
Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis, Assembly and Electrochemical Behavior

Junfeng Zhai,Yueming Zhai,Dan Wen,Shaojun Dong

DOI: https://doi.org/10.1002/elan.200904680

IF: 3.077

2009-01-01

Electroanalysis

Abstract:Prussian blue/carbon nanotube (PB/CNT) hybrids with excellent dispersibility in aqueous solutions were synthesized by adding CNTs to an acidic solution of Fe3+, [Fe(CN)(6)](3-) and KCl. Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy and scanning electron microscopy were employed to confirm the formation of PB/CNT hybrids. The PB nanoparticles formed on the CNT surfaces exhibit a narrow size distribution and an average size of 40 nm. The present results demonstrate that the selective reduction of Fe3+ to Fe2+ by CNTs is the key step for PB/CNT hybrid formation. The subsequent fabrication of the PB/CNT hybrid films was achieved by layer-by-layer technique. The thus-prepared PB/CNT hybrid films exhibit electrocatalytic activity towards H2O2 reduction.
Thermal Conversion of Hollow Prussian Blue Nanoparticles into Nanoporous Iron Oxides with Crystallized Hematite Phase

Mohamed B. Zakaria,Ming Hu,Naoaki Hayashi,Yoshihiro Tsujimoto,Shinsuke Ishihara,Masataka Imura,Norihiro Suzuki,Yu-Yuan Huang,Yoshio Sakka,Katsuhiko Ariga,Kevin C-W Wu,Yusuke Yamauchi

DOI: https://doi.org/10.1002/ejic.201301307

IF: 2.551

2014-01-01

European Journal of Inorganic Chemistry

Abstract:We recently demonstrated that Prussian blue (PB) coordination polymers can be successfully etched by acidic solution for the preparation of hollow PB nanoparticles (Angew. Chem. Int. Ed.2012, 51, 984). In this paper, by using hollow PB nanoparticles as starting materials, we calcined them under various conditions to prepare nanoporous Fe oxides with a crystallized -Fe2O3 (hematite) phase. The obtained particles were carefully characterized by scanning electron microscopy, wide-angle X-ray diffraction, nitrogen gas adsorption-desorption isotherms, transmission electron microscopy, and Mossbauer spectroscopy. The morphologies, surface areas, and degrees of crystallinity of the samples were varied by changing the number of hours of calcination. After calcination at 400 degrees C for 4 h, formation of a crystallized -Fe2O3 phase was confirmed, although some residues of amorphous and/or -Fe2O3 phases were also present. With a further increase in the calcination time (up to 7 h), the -Fe2O3 phase was predominantly formed. The obtained sample exhibited high surface area, which will be useful for photocatalytic applications.
Size- and shape-controlled synthesis of Prussian Blue nanoparticles by a polyvinylpyrrolidone-assisted crystallization process

hu ming,nagy l k torad,yadong chiang,kevin c w wu,yusuke yamauchi

DOI: https://doi.org/10.1039/c2ce25040c

IF: 3.756

2012-01-01

CrystEngComm

Abstract:The preparation of coordination polymer nanoparticles is currently the focus of research attention because of the advantage of increasing the specific surface area. In this paper, we report a facile method to prepare Prussian Blue (PB) nanoparticles with different particle sizes. Their particle sizes have a wide range from a few dozen nanometres to a submicrometre, depending on the synthetic conditions. The obtained particles can be divided into three categories: small (around 20 nm), medium-sized (around 100 nm), and large (in excess of 200 nm). The medium-sized and large particles are formed by oriented aggregation of fine nanoparticles, showing a mesocrystal conformation (i.e., pseudo-single crystal nature). Our results strongly suggested that non-classical crystallization dominates the present system, which can help to further control and understand the crystallization process of other coordination polymers. By means of N-2 gas adsorption-desorption measurements, the nanoporosity and specific surface areas for typical samples with three different particle sizes are characterized. Among these samples, medium-sized PB particles show the highest surface area of 260 m(2) g(-1), while large PB particles exhibit very poor porosity. The results show that the gas uptakes of coordination polymers can be adjusted by the particle size and shape.
Three-dimensional Hierarchical Prussian Blue Composed of Ultrathin Nanosheets: Enhanced Hetero-Catalytic and Adsorption Properties.

Fan-Xing Bu,Ming Hu,Wei Zhang,Qi Meng,Li Xu,Dong-Mei Jiang,Ji-Sen Jiang

DOI: https://doi.org/10.1039/c5cc06281k

IF: 4.9

2015-01-01

Chemical Communications

Abstract:Three-dimensional hierarchical Prussian blue composed of ultrathin nanosheets was successfully synthesized by employing a self-aggregation and oriented attachment strategy. The unique structure highly increases the exposure of micropores and metal sites of Prussian blue to guests, thus significantly enhancing its hetero-catalysis and adsorption properties compared to cubic and commercial counterparts.
Growth of Prussian Blue Microcubes under A Hydrothermal Condition: Possible Nonclassical Crystallization by A Mesoscale Self-Assembly

Xiao-Jun Zheng,Qin Kuang,Tao Xu,Zhi-Yuan Jiang,Shu-Hong Zhang,Zhao-Xiong Xie,Rong-Bing Huang,Lan-Sun Zheng

DOI: https://doi.org/10.1021/jp065055n

2007-01-01

Abstract:A classical crystallization process starts from stable nuclei followed by a simple enlargement of the nuclei by unit-cell replication. In recent years, the universality of such classical crystallization has been questioned upon investigations of biomineralization processes, and there are few examples showing that crystal growth may not follow such a classical crystallization process. In this paper, a typical coordination polymer, Prussian blue microcrystals, has been synthesized under hydrothermal conditions. By carefully analyzing the intermediates during the crystal growth process, we found that the growth of Prussian blue under the given growth conditions may follow a nonclassical crystal growth process in which a mesoscale self-assembly of nanocrystallites is included during crystal growth. Such a mesoscale self-assembly process could be a common phenomenon for growth of some crystals with extremely low solubility.
Prussian Blue Microcrystals with Morphology Evolution As a High-Performance Photo-Fenton Catalyst for Degradation of Organic Pollutants

Na Wang,Wenjie Ma,Yunchen Du,Ziqiu Ren,Binhua Han,Leijiang Zhang,Bojing Sun,Ping Xu,Xijiang Han

DOI: https://doi.org/10.1021/acsami.8b14987

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:The morphology-dependent property of crystal materials has aroused extensive attention and raised high requirements for subtly tailoring the morphology of micro-/nanocrystals. Herein, we develop an in situ etching method for preparation of Prussian blue (PB) microcrystals with morphology evolution by progressively increasing the concentration of chloroplatinic acid in the reaction system. These PB microcrystals with controllable morphologies are employed as photo-Fenton reagents to degrade organic pollutants. PB hexapods (PB-hpds) and PB hexapod stars present superior catalytic performance to pristine PB microcubes and other PB intermediates with truncated corners or edges because of their high specific surface areas and adequate exposure of FeIII-NC coordination active sites. In the reusability test, the reused PB-hpds present more efficient catalytic performance for rhodamine B decomposition compared with the pristine catalyst. According to more investigations, the reasonable mechanism is proposed that FeIII-NC exhibits higher catalytic activity than FeII-CN in the specific coordination environment. The increased content of surface FeIII-NC coordination active sites is the key factor in accelerating the decomposition of H2O2 and enhancing the photo-Fenton performance of PB-hpds. Several operating parameters including catalyst dosage, H2O2 concentration, pH value, and reaction temperature are evaluated in detail. Classical quenching experiments and electron paramagnetic resonance measurements further reveal that HO• should be responsible for high performance of catalysts. This work will be significant for tailoring the morphology of the materials and arousing more attention to enhance the stability and reusability of catalysts.
Self‐Sustained‐Release Strategy Realizes Colloid Oriented Assembly to Fabricate Prussian Blue with Hierarchical Structure

Hang Li,Ye Hu,Mengfei Su,Chunyan Zhang,Feng Gao,Qingyi Lu

DOI: https://doi.org/10.1002/smll.202402920

IF: 13.3

2024-06-13

Small

Abstract:A self‐sustained‐release strategy based on the slow release of metal ions from coordination ions is proposed to guide the assembly of Prussian blue (PB) crystals. The PB hierarchical structure with branched fractal structure, octahedral fractal structure, and spherical fractal structure is effectively constructed. The controlled self‐assembly of nanomaterials has been a great challenge in nanosynthesis, especially for hierarchical architectures with high complexity. Particularly, the structural design of Prussian blue (PB) series materials with robustness and fast nucleation is even more difficult. Herein, a self‐sustained‐release strategy based on the slow release of metal ions from coordination ions is proposed to guide the assembly of PB crystals. The key to this strategy is the slow release by ligand, which can create ultra‐low concentrations of metal ions so as to provide the possibility to realize the surface charge manipulation of PB primary colloids. By adding electrolyte or changing the polarity of the solution, the surface charge regulation of PB colloid is realized, and the PB hierarchical structures with branch fractal structure (PB‐BS), octahedral fractal structure, and spherical fractal structure are effectively constructed. This work not only achieves the designability of the PB structure, but also synchronizes the functionalization during the PB assembly growth process by in situ encapsulation of the effective catalytic active component L‐Ascorbic acid. As a result, the assembled PB‐BS exhibits greatly enhanced catalytic activity and selectivity in styrene oxidation with the selectivity of oxidized styrene increasing from 35.6% (PB) to 80.5% (PB‐BS).

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Synthesis and Characterization of Prussian Blue@platinum Nanoparticle Hybrids from a Mixture Solution of Platinum Nanocatalyst and Ferric Ferricyanide

Zhang Jia,Wen Yang,Hui Zhu,Jing Li,Fan Yang,Bailin Zhang,Xiurong Yang

DOI: https://doi.org/10.1016/j.jcis.2009.05.057

IF: 9.9

2009-01-01

Journal of Colloid and Interface Science

Abstract:In the present study, platinum nanoparticles modified with Prussian blue (PB) have been synthesized by a heterogeneous catalytic reaction. Transmission electronic microscopy (TEM) confirmed the deposition of nanoclusters around the surfaces of platinum particles, and spectroscopic studies verified that the molecular composition of the nanoclusters was dominantly PB and a minority of platinum ferricyanide. Thus, it was shown that the platinum particles behaved not only as catalysts for the growth of PB, but also as a reactant to generate a PB analogue complex. Moreover, potassium was not detected in the final product, demonstrating that the molecular nature of PB was in the "water-insoluble" form, Fe(4)(3+)[Fe(II)(CN)(6)](3).
Size and Morphology-Controlled Ni2[Fe(CN)6]·xH2O Prussian Blue Analogue Fabricated Via a Hydrothermal Route

Shaohua Xu,Xuefeng Qian,Gang Li

DOI: https://doi.org/10.1016/j.materresbull.2007.02.009

IF: 5.6

2007-01-01

Materials Research Bulletin

Abstract:Nanocrystalline Prussian Blue analogue Ni2[Fe(CN)6]·xH2O was synthesized through hydrothermal process at 180°C for 24h with NiSO4·6H2O and K4[Fe(CN)6]·3H2O as precursors. The effects of reactant concentration and protective matrix (Polyethylene glycol 400, PEG-400) on the size and morphology of nanoparticles were investigated. The as-synthesized products were identified as face-centered cubic structure by powder X-ray diffraction. Field-emission scanning electron microscopy and transmission electron microscopy images showed that well dispersed nanoparticles with fairly narrow size distribution were successfully prepared.
Synthesis of Mesoporous Yolk-Shell Magnetic Prussian Blue Particles for Multi-Functional Nanomedicine

Yi-Fei Guo,Qi-Chen Fang,Jun Xu,Fan-Xing Bu,Wei Zhang,Ming Hu,Ji-Sen Jiang

DOI: https://doi.org/10.1166/jnn.2018.14859

2018-01-01

Journal of Nanoscience and Nanotechnology

Abstract:Mesoporous magnetic Prussian Blue (PB) particles are good condidates for theragnostic nanomedicine. However, there are lack of efficient methods for fabrication of such materials. Here, we reported the synthesis of the mesoporous yolk-shell Fe3O4@PB particles by one-pot coordination replication and etching. Time-dependent transmission electron microscopy illustrated that the PB crystals nucleated and grew on the surface of Fe3O4 spheres by coordination replication with the help of protons. The extra protons in the reaction medium further disassociated the Fe3O4 and PB, leading to mesoporous particles. The mesoporous yolk-shell Fe3O4@PB particles showed enhanced efficacy for loading cisplatin. The release of the drug molecules could be facilitated by increasing temperature. Both photo irradiation and alternating magnetic fields could trigger the release of heat from the composite. The obtained materials could delivery cisplatin to kill cancer cell intracellularly.
Synthesis of hollow Prussian blue cubes as an electrocatalyst for the reduction of hydrogen peroxide

Qinglin Sheng,Dan Zhang,Yu Shen,Jianbin Zheng

DOI: https://doi.org/10.1007/s11706-017-0382-z

2017-01-01

Frontiers of Materials Science

Abstract:A cubic Prussian blue (PB) with the hollow interior was successfully synthesized by direct dissociation followed by a controlled self-etching process. The etching process also made hollow Prussian blue (HPB) a porous structure. SEM, TEM and XRD were employed to confirm the structure and morphology of the prepared materials. Then HPB and chitosan (CS) were deposited on a glassy carbon electrode (GCE), used to determine H 2 O 2 . The amperometric performance of HPB/CS/GCE was investigated. It was found that the special structure of HPB exhibits enhanced performance in the H 2 O 2 sensing.
Surface Modified Iron Oxide Nanoparticles As Fe Source Precursor to Induce the Formation of Prussian Blue Nanocubes.

Sunling Hu,Xiaoqing Zhang,Fengchao Zang,Yu Zhang,Wei Zhang,Yihang Wu,Mengjie Song,Yuehua Wang,Ning Gu

DOI: https://doi.org/10.1166/jnn.2016.10758

2016-01-01

Journal of Nanoscience and Nanotechnology

Abstract:Nano-sized Prussian blue (PB) cubes were synthesized at room temperature by simply stirring the mixture of surface modified iron oxide nanoparticles (IONPs) and potassium ferrocyanide in an aqueous acid solution. The nanocubes were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The influence of different molecules modified on the surface of IONPs on the cube formation was discussed. The surface modification with dimercaptosuccinic acid (DMSA), 3-aminopropyltriethoxysilane (APTS) and citric acid (CA) all displayed a key role in the formation precess of PB nanocubes, but which could not be formed as bare IONPs or Fe3+ were used as precursor. Combined with the reaction process tracing with UV-vis absorption spectroscopy and TEM, a possible kinetically controlled growth mechanism was proposed where slower formation rate of amorphous PB due to very low release rate of Fe ions from the surface modified IONPs and subsequent recrystallization are responsible for the obtained PB nanocubes. The peroxidase-like catalytic activity of the synthesized nanocubes was investigated and catalysis was found to follow Michaelis-Menten kinetics. The potential of using such PB nanocubes as an effective MRI contrast agent was also demonstrated.

Prussian Blue Mesocrystals Prepared by a Facile Hydrothermal Method

Prussian Blue Mesocrystals: an Example of Self-Construction

Prussian Blue Microcrystals Prepared by Selective Etching and Their Conversion to Mesoporous Magnetic Iron(iii) Oxides

Preparation of Various Prussian Blue Analogue Hollow Nanocubes with Single Crystalline Shells

Ultralight Mesoporous Magnetic Frameworks by Interfacial Assembly of Prussian Blue Nanocubes.

Characterization of Prussian Blue Nanoparticles Prepared by Reverse Micelle and Electrochemical Study of Their Assembly

Fabrication and electrochemical study of monodisperse and size controlled Prussian blue nanoparticles protected by biocompatible polymer

Synthesis and Characterization of Organometallic Coordination Polymer Nanoshells of Prussian Blue Using Miniemulsion Periphery Polymerization (Mepp)

Controllable Synthesis and Formation Mechanism Investigation of Prussian Blue Nanocrystals by Using the Polysaccharide Hydrolysis Method

Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis, Assembly and Electrochemical Behavior

Thermal Conversion of Hollow Prussian Blue Nanoparticles into Nanoporous Iron Oxides with Crystallized Hematite Phase

Size- and shape-controlled synthesis of Prussian Blue nanoparticles by a polyvinylpyrrolidone-assisted crystallization process

Three-dimensional Hierarchical Prussian Blue Composed of Ultrathin Nanosheets: Enhanced Hetero-Catalytic and Adsorption Properties.

Growth of Prussian Blue Microcubes under A Hydrothermal Condition: Possible Nonclassical Crystallization by A Mesoscale Self-Assembly

Prussian Blue Microcrystals with Morphology Evolution As a High-Performance Photo-Fenton Catalyst for Degradation of Organic Pollutants

Self‐Sustained‐Release Strategy Realizes Colloid Oriented Assembly to Fabricate Prussian Blue with Hierarchical Structure

Synthesis and Characterization of Prussian Blue@platinum Nanoparticle Hybrids from a Mixture Solution of Platinum Nanocatalyst and Ferric Ferricyanide

Size and Morphology-Controlled Ni2[Fe(CN)6]·xH2O Prussian Blue Analogue Fabricated Via a Hydrothermal Route

Synthesis of Mesoporous Yolk-Shell Magnetic Prussian Blue Particles for Multi-Functional Nanomedicine

Synthesis of hollow Prussian blue cubes as an electrocatalyst for the reduction of hydrogen peroxide

Surface Modified Iron Oxide Nanoparticles As Fe Source Precursor to Induce the Formation of Prussian Blue Nanocubes.