Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Preparation of functional poly(ether–urethane) for immobilization of human living cells 1. Surface graft polymerization of poly(ether–urethane) with 2-(dimethylamino)ethyl methacrylate and quaternization of grafted membrane

Surface modification of polyurethane for promotion of cell adhesion and growth 1: Surface photo-grafting with N,N-dimethylaminoethyl methacrylate and cytocompatibility of the modified surface

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Functionalizing of Polyurethane Surfaces by Photografting with Hydrophilic Monomers

Surface Immobilization of Bioactive Molecules on Polyurethane for Promotion of Cytocompatibility to Human Endothelial Cells

Influence of Quaternized Polyurethane Membrane Surfaces on Human Endothelial Cell Attachment and Growth

Grafting of Hydrophilic Monomers Onto Polyurethane Membranes by Solution or Pre-Absorbing Methods for Acceleration of Cell Compatibility

Immobilization of Gelatin Onto Polyurethane Membrane Surface and Acceleration of Endothelial Cells Growth

Preparation of Hyperbranched Polyethyleneimine Composite Membrane Using Interfacial Polymerization Catalyzed by 4-Dimethylamiopryidine

Synthesis of an Amphiphilic Glucose‐carrying Graft Copolymer and Its Use for Membrane Surface Modification

Photografting of Poly(Hydroxylethyl Acrylate) Onto Porous Polyurethane Scaffolds to Improve Their Endothelial Cell Compatibility

Preparation and Characterization of Graft Copolymer EVA-g-PU

Surface modification of poly(ether urethane) membrane with RGD and its cytocompatibility of human endothelial cell

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

In Situ Immobilization of Proteins and Rgd Peptide on Polyurethane Surfaces Via Poly(Ethylene Oxide) Coupling Polymers for Human Endothelial Cell Growth

Surface modification of polypropylene microporous membrane by the immobilization of dextran

Hydrophilic modification of poly(phthalazine ether sulfone ketone) ultrafiltration membranes by the surface immobilization of poly(ethylene glycol) acrylates

Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators

Surface Modification of Microporous Polypropylene Membranes by Graft Polymerization of N,N-Dimethylaminoethyl Methacrylate