Abstract:Real-time acquisition of coal stress is the key to early warning and prevention of rock burst. In the drilling process, drilling parameters will change correspondingly with the change of coal stress. This paper, according to the bit drilling coal link, establishes a theoretical model of drilling in order to verify the reliability of the theoretical model of specific work of drilling crushing, use the self-developed drilling measurement experimental device, and develop the drilling tests on raw coal samples under different lateral stresses. Meanwhile, we study the variation law of drilling parameters with coal stress and reveal the energy conversion mechanism of drilling machine energy to drilling chip surface energy. Through parameter analysis of the theoretical model, it is found that the drilling pressure, torque, and rotation speed increase with increasing coal stress, while the drilling speed decreases with increasing coal stress. The drilling test results show that the particle size of drilling cuttings is approximately normally distributed, the surface energy of drilling cuttings, the mechanical energy of drilling rig, and the amount of drilling cuttings all increase with increasing stress. The mechanical energy of drilling rig is mainly converted into surface energy of drilling cuttings in the process of raw coal drilling. In addition, 8.56–33.12% of the mechanical energy is converted into other energy, with the maximum deviation of 21.50% between the coal stress of the drilling test and the theoretical model of fracture drilling. The research results show that most of the deviation percentages were basically around 10% except for a few deviation percentages, which shows that theoretical model can predict the coal stress through drilling parameters, coal rock properties, and bit parameters. The new method proposed in this paper is of great significance for obtaining the stress distribution state of coal in real time and detecting the stress concentration area of coal.

Study on the Coal-Rock Interface Identification Based on the Signal Analysis

New Effective Method for Identification of Coal and Roof Interface Based on Cutting Performance

Study on coal-rock interface characteristics change law and recognition based on active thermal excitation

Numerical Study on Characteristics of Stick-Slip Instability of Coal-Rock Parting-Coal Structure under Lateral Unloading

Research on identification method of coal-rock interface based on ground penetrating radar in the driving face of soft coal seam

Coal-rock Interface Recognition Method Based on GAF-deep Learning

Simulation of the Working Performance of a Shearer Cutting Coal Rock

Microcrack monitoring and fracture evolution of coal and rock using integrated acoustic emission and digital image correlation techniques

Research on Mechanisms and Precursors of Slip and Fracture of Coal–Rock Parting–Coal Structure

Dynamic characteristics analysis on shearer drum in condition of cutting coal with different distributed rocks

Research on instability characteristics and precursory effect of coal-rock parting-coal structures

Numerical study on the characteristics of roadway failure and instability in coal seam with rock parting

A Study on the Dynamic Transmission Law of Spiral Drum Cutting Coal Rock Based on ANSYS/LS-DYNA Simulation

Dynamic response of a coal rock caving impact tail beam for hydraulic support

Study on the wear of spiral drum cutting coal containing rock

Recognition of interface and category of roadway roof strata based on drilling parameters

A new method for monitoring coal stress while drilling process: theoretical and experimental study

Vibration response difference of caving mechanism under coal rock impact based on mechanical–hydraulic coupling

Comparative research on the precursory characteristics of critical slowing down before the failure of raw coal and briquettes

Mechanical and Acoustic Emission Characteristics of Coal-like Rock Specimens under Static Direct Shear and Dynamic Normal Load

Research on intelligent identification algorithm of coal and rock strata based on Hilbert transform and amplitude stacking