Abstract:Vehicles commonly suffer from the narrow-band noises and vibrations, usually a superposition of multiple sinusoidal signals, due to the excitations of engines, electrical motors, gear boxes, and other rotating mechanical parts. These excitations are transmitted to a reference point of some structure with certain transmission paths. The vibration signal measured at the reference point can be used for power system monitoring, fault diagnosis, modal analysis, noise analysis, etc. For convenience, researchers in a laboratory usually use shakers to generate expected narrow-band vibration signals acting on the vehicle structure reference points to simulate the vibration signals. However, there is a prominent difficulty in ensuring the amplitude and phase accuracy of each sub-frequency component simultaneously. In order to improve the accuracy of generating the expected vibration signal, this paper presents a multi-source vibration simulation control technology based on the tracking filter method. The main idea is to use the tracking filter to estimate the amplitude and phase of the target sub-frequency component accurately. Further, on the target sub-frequency, the drive signal of shakers is then corrected based on the amplitude and phase errors to achieve a more accurate target vibration signal. The amplitude and phase of each sub-frequency component in the excitation signal can be controlled independently. Compared with other Fast Fourier Transform (FFT)-based frequency domain analysis algorithms and numerical methods by solving the equations, the tracking filter method has a higher frequency resolution and higher accuracy. It can be easily realized in real time applications due to its simplicity. Finally, verification experiments are completed. The experimental results show that the multi-source vibration simulation control technology presented in this paper can achieve high-precision amplitude and phase on each sub-frequency component of the target vibration signals, which contain up to eight sub-frequency components.

Application of Wavelet Denoising Technology Based on LabWindows/CVI in Vibration Signal Testing

Sine-On-Random Vibration Test Based On Multi-Resolution Spectrum Estimation And Wiener-Khinchin Theorem

Research on Control Accuracy at Low Frequency in Vibration Test

Research On Control Technologies For A High-Precision Multi-Source Vibration Simulation System

Denoising by Wavelet Soft-Thresholding in Fault Analysis

Full-field Extraction of Subtle Displacement Components Via Phase-Projection Wavelet Denoising for Vision-Based Vibration Measurement

Adaptive Wavelet Thresholding Based Ultrasonic Signal Denoising

Decomposition and reconstruction with wavelet-packet of mechanical fault signals based on LabVIEW

Wavelet Denoising of the Horizontal Vibration Signal for Identification of the Guide Rail Irregularity in Elevator

Application of Morphology Filtering Method in Vibration Signal De-Noising

Application Of Wavelet Theory For Denoising In Acoustic Logging

A New Method of Denoising of Vibration Signal and Its Application

Application of an Improved Wavelet Threshold Denoising Method for Vibration Signal Processing

Application of the hybrid integration displacement algorithm based on CEEMDAN and wavelet threshold denoising in vibration screening equipment

Piecewise Polynomial Fitting with Trend Item Removal and Its Application in a Cab Vibration Test

Wavelet Denoising of Vehicle Platform Vibration Signal Based on Threshold Neural Network

Application of Wavelet Packet Decomposition in Denoising of Motorized Spindle Vibration Signal Processing

Method for Denoising the Vibration Signal of Rotating Machinery through VMD and MODWPT

Investigation of microseismic signal denoising using an improved wavelet adaptive thresholding method

Application of Wavelet Analysis in Denoising Seismic Data

Denoising method of machine tool vibration signal based on variational mode decomposition and Whale-Tabu optimization algorithm