Abstract:The 3-RRRS mechanism (RRRS refers to kinematic pairs of a branched chain consisting of three R pairs (Rotational pairs) and one S pair (Spherical pair), successively) is used between a moving platform and a static platform, through which six-dimensional motion of the moving platform relative to the static platform can be achieved. Selecting six independently drivable joints from nine active joints makes it problematic to deal analytically with the kinematics of the 3-RRRS mechanism. In this article, a novel computer-aided geometric method for kinematic analysis is developed. This method can automatically detect the independently drivable joints for arbitrary kinematic chains. This method can be easily implemented compared to the analytical method of the forward kinematics. Based on the constraint relationship of the 3-RRRS mechanism, a general 3-RRRS mechanism digital model is built in the SolidWorks Application Program Interface embedded Visual Basic environment, in which the platform sizes and active driving angles are driven by the parameterized model, to make the moving platform move to the corresponding pose. After the pose of the moving platform is confirmed, the coordinate system is built in a preliminary sketch. The parameters are measured by the SolidWorks measuring functions, and the pose of the moving platform is obtained by combining homogeneous matrices. Using the computer-aided geometric method, the detailed kinematics formula is not required. The accuracy and efficiency of the computer-aided geometric method were assessed with some examples of kinematic analysis for the 3-RRRS mechanism. The results showed that the proposed method obtained competitive precision and calculation time to the analytical method and is beneficial as a convenient solving process. By using Visual Basic programming, a reachable poses analysis of the mechanism can be merged into the kinematics analysis system of the computer-aided geometric method. The computer-aided geometric method could be widely applied to kinematics analysis of mechanisms.

Research on Kinematics of the 3-RRR Parallel Mechanism

Degree of Freedom and Position Analysis of 3-RPRR Spatial Parallel Mechanism

Forward Kinematic Analysis of a 3-RRRS Mechanism with Subordinate Driving Variables Using a Computer-Aided Geometric Method

Stiffness Analysis of Spherical Parallel Mechanism 3-RRR with 3-DOF

Kinematics analysis of the 3-DOF rotation parallel mechanism

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

A Comparison Study of Two Planar 2-DOF Parallel Mechanisms: One with 2-RRR and the Other with 3-RRR Structures.

Kinematic Performance and Accuracy Analysis of New Type 3-DOF Parallel Mechanism

Kinematics Performance Comparison of a Family of 3-RPS Parallel Mechanisms Affected by Limb Arrangement

Kinematics Analysis of a Novel 2r1t Parallel Mechanism

Dynamic Modeling of Overconstrained Parallel Robot

Position Analysis and Research of Reachable Workspace of 3-CRS/SP Parallel Mechanism

Kinematics and Inverse Dynamics Analysis for a Novel 3-PUU Parallel Mechanism.

Kinematics Analysis Of A 3-Dof Rotational Parallel Mechanism

Kinematics Analysis of a Novel Parallel Platform with Passive Constraint Chain

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Construction and forward kinematics of a novel reconfigurable parallel mechanism

Finite displacement screw-based group analysis of 3PRS parallel mechanisms

Realization of 3D Modeling and Kinematics Simulation on a New 3P- 1R Parallel Mechanism

Kinematics Analysis of a 3-Dof 3-P_C(RR)_N Spherical Parallel Manipulator

Dynamics Modeling and Frequency Analysis of a 3-RRS Flexible Parallel Manipulator