Abstract:Little detailed information is available on the microwave drying characteristics of potato and the use of different microwave powers to dry food products. Experiments were conducted to study the microwave drying characteristics and the dried quality of potato. The study focuses on describing the microwave drying characteristics of potato and discussing the effect of sample thickness, drying power and mass. The results show that if the power level increases, the mass load decreases and the thickness of the sample decreases, the dehydration rate increases and the drying energy consumption decreases. There are two falling rate periods during microwave drying of potato: the first falling rate period is for a moisture content of more then 1.1 (dry basis, DB); the second falling rate period is for a moisture content of less than 1.1 (DB). The same water loss will consume more energy when the moisture content is less than 1.1 (DB). A two-stage drying process was employed during microwave drying of potato. The microwave power of the first drying stage differed form that of the second drying stage. The moisture content of the breakpoint for the conversion of the first drying stage into the second drying stage is a moisture content of 1.1 (DB). A quadratic orthogonal regression experiment was conducted, and the effects of slice thickness, the first drying load power and the second drying load power on sensory quality, the rehydration ratio and the energy consumption rate were established. The slice thickness, the first drying load power and the second drying load power linearly affected the three indices. The effect of the product of the second drying load power and the potato slice thickness on the rehydration ratio and the energy consumption rate is significant. The optimum drying parameter combination for the three indices was obtained. The rehydration ratio of the dried products decreased with an increase of the second drying load power and the slice thickness. The concave curves of the sensory quality versus the three factors were shown.

Study on the Optimization of the Microwave Puffing Pumpkin

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

Optimization of processing of recombined crisps from Pleurotus nebrodensisby response surface methodology

Optimization of Extraction Technology of Total Flavonoids from Toots of Chenopodium Glaucum (l.)using Response Surface Methology

The Drying Characteristics and Technology of Potato Slices by Microwave

Optimization of microwave heating on orange sacs products

Characteristics and Model of Microwave Drying Sweet Potato

EFFECT OF PROCESSING FACTORS OF EXPLOSION PUFFING ON POTATO CHIPS QUALITY

Application of Fuzzy Evaluation Combined with Response Surface Methodology in the Formulation Optimization of Microwaved Spicy Chili Chicken

Optimization of Production Technology of Crystal Moon Cake Crust by Response Surface Methodology

Optimization of the Extraction of Polysaccharides from Physalis alpepengi Defatted Feed by Microwave-assisted

Study on Heat and Mass Transfer Performance during Heating, Pressurization and Expansion Stage in Explosion Puffing at Low Temperature and High-Pressure

Processing of Recombined Crisps from Purple Yam and Crab Mushroom by RSM

Experiment Research on Combustion of Microwave Modified Pc

Microwave Drying Characteristics of Potato and the Effect of Different Microwave Powers on the Dried Quality of Potato

Design and Key Parameter Optimization of Conic Roller Shelling Device Based on Walnut Moisture-Regulating Treatments

Optimization of Microwave-Assisted Extraction Conditions of Polyphenol from Picea Koraiensis Nakai by Response Surface Methodology

Effects of the Varieties and Properties of Starch on Puffing under Microwave Irradiation

Effect of Microwave and Ultrasonic Coupling Treatment on Granularity and Microstructure of Pulverized Coal

Process optimization of microwave drying sludge with response surface methodology

Optimization of Processing Parameters for Continuous Microwave Drying of Crab Apple Slices via Response Surface Methodology