Abstract:<p>Dendritic growth is one of the most important phenomena during the solidification of alloys. However, solute redistribution on the front of solid-liquid interface may result in nonuniform distribution of concentration between dendrite branches. This often causes microscopic segregation and undermines the properties of materials. In order to control the solidification microstructure of Al–Li alloy, we firstly need to understand in depth the morphological and concentration evolution during dendrite growth. Here, the KKS (S.G. Kim, W.T. Kim, T. Suzuki) phase-field model coupling CALPHAD data is employed. The dependences of the dendrite morphologies and growth kinetics on undercooling or initial solute concentration are qualitatively analyzed. Dendrite growth rate increases slowly when undercooling ΔT is approximately less than 25 °C, and steeply when ΔT>40 °C corresponding to the transition from diffusional dendrite growth into rapid solidification. Accordingly, the obtained morphologies change from dendrite into seaweed crystal. The increase of supersaturation influences dendrite growth similarly in terms of growth rate and morphology. Moreover, through simulation of columnar dendrites growth, we find that the microscopic segregation becomes more severely with decreasing undercooling, or increasing supersaturation. These results demonstrate the capability of the technology---phase-field simulation coupling to CALPHAD in the modelling of microstructure evolution during solidification of alloys.</p>

Effect of Liquid Diffusion Coefficients on Microstructure Evolution During Solidification of Al356.1 Alloy

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

A New Diffusivity Database for Multi-Component Al Alloys: Focusing on Ternary Systems and its Effect on Microstructure Evolution during Solidification

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Phase-Field Simulation of Microstructure Evolution in Industrial A2214 Alloy During Solidification

Simulation for microstructure evolution of Al-Si alloys in solidification process

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

Liquid Channel Segregation and Morphology and Their Relation with Hot Cracking Susceptibility During Columnar Growth in Binary Alloys

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Effect Of Low Diffusion Coefficient On Eutectic Instability Of Al-25 Wt%Sm Alloy

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases

Diffusivities of an Al–Fe–Ni Melt and Their Effects on the Microstructure During Solidification

EFFECT OF MICRO SCALE HEAT AND MASS TRANSFER ON SOLIDIFICATION OF BINARY ALLOYS

Examination of dendritic growth and microsegregation during solidification of Al–Li binary alloy using the phase-field simulation coupling CALPHAD data

Simulation on microstructure evolution of Al−Si alloy under effect of natural convection during solidification

Study on microstructure evolution and liquid-solid correlation of pure aluminum melts

Interdiffusion cross-high-entropy alloys, nano-multilayer foils, and Al interface: An atomistic simulation

Numerical simulation on solute partition and solid fraction evolution in solidification of Al-Cu-Mg alloys