Abstract:Due to the excellent thermal propulsion performances of detonation, it has been applied for the purpose of aerospace propulsion devices, e.g., pulse detonation engines (PDEs), rotating detonation engines (RDEs), and oblique detonation wave engines (ODWEs). However, it remains challenging for developing those new-concept propulsion devices, mainly because it is a formidable task to establish a steady and self-sustained detonation in the hypersonic flow and combustible mixture. One of the fundamental problems is to understand the interaction of diffractions and the detonation waves within the engines. In this study, perforated plates with various blockage ratios are seated at the beginning of the detonation propagation to explore the diffractions that generated from the plates on the detonation propagation mechanism. Two explosive mixtures of C2H2 + 5N2O and C2H2 + 2.5O2 + 70% Ar are studied to illustrate the difference in propagation velocity behavior of detonation after it suffers from large-scale diffractions. The results show that diffractions have less effect on the propagation of highly unstable mixture, and the effect becomes obvious as BR increases to 0.962; this phenomenon occurs because detonation has an irregular cellular pattern and sub-structures are characterized by highly unstable detonation, in which the detonation instabilities are amplified by the large perturbations of obstacles, leading to an augment in forming more cellular cells of detonation in its front that cover the weakening effects from diffractions. In contrast, the diffractions significantly affect the stable mixture, manifested by a remarkable increase of the critical pressure for a self-sustained detonation downstream of the obstacle with the augment of blockage ratio; this phenomenon can be attributed to the diffractions being distributed along the curvature over the detonation surface, thereby causing more excessive curvature of the entire detonation front, which in turn exacerbates the failure of detonation.

Structure and Working Principle of Flying Plate Detonator

A study on integrated system of tracer gas leakage detection in detonation experiment

Study on the Matching Relationship between Flyer Material and Accelerating Barrel of Flying Plate Detonator

A Technique For Highly Precise And Safe Delay Detonator Without Primary Explosive

Laser Initiation of Non-Primary Explosive Detonators

The key technique of highly precise and safe delay detonator without primary explosive

Research Progress in the Function Mechanism of Exploding Foil Initiator

A new type of explosive diode and its mechanism

Explosives with Structure of Honeycomb and its Application

Investigation of system parameters towards safer impact based shock-to-detonation transition in a novel laser driven flyer plate prototype

Theoretical Analysis and Numerical Simulation of the Motion of RDX Deflagration-Driven Flyer Plate Based on Laser-Initiated Micro-Pyrotechnic Devices

The Attenuation and Reignition of a Gaseous Detonation Propagating Through a Perforated Steel Plate Section

Test on Delay Time of Hi-safe Detonator

Velocity Behavior Downstream of Perforated Plates with Large Blockage Ratio for Unstable and Stable Detonations

Microstructures of ANFO and Their Effects on Detonator Initiation Sensitivity

Structure Design of Sensor for Detecting Deflagration of Trace Explosive

Research on a MEMS Detonated Device with Built-in Safety and Arming Device

Mechanism of an explosion diode and effects of its extinction channel size on its properties

APPLICATION OF ELECTRONIC DETONATOR IN CLEARING COKING OF FURNACE CHAMBER IN POWER PLANT

Study on direct initiation process and initiation mechanism of acetylene/oxygen premixed gas detonation

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device