Abstract:In this paper, a dynamic-balancing testing system is designed. The innovative feature of the testing system is the dynamic balancing of the rotor system with robustness and high balance efficiency which meets the requirements of engineering application. The transient characteristic-based balancing method (TCBM) interface and the influence coefficient method (ICM) interface are designed in the testing system. The TCBM calculates the unbalance by the transient vibration responses while accelerating rotor operating without trail-weight. The ICM calculates the unbalance by the steady-state vibration responses while the rotor system operates with trail-weight and constant speed. The testing system has the functions of monitoring operations synchronously, measuring and recording the required vibration responses, analyzing the dynamic characteristics, and identifying the unbalance parameters. Experiments of the single disc rotor system are carried out, and the maximum deflection of the measuring point has decreased by 73.11% after balancing by the TCBM interface. The maximum amplitude of the measuring point at 2914 r/min has decreased by 77.74% after balancing by ICM interface, while the maximum deflection during the whole operation has decreased by 70.00%. The experiments prove the effectiveness of the testing system, while the testing system has advantages of convenient and intuitive operation, high balance efficiency, and security.

Design and Implement of a New Type of ACM Testing System

Development Of Automatic Vibration Calibration System

Testing System of Characteristics of Electrical Vibration Table

Measuring and Controlling System of the Accelerated Bearing Life Tester with Auto-loading

An Automatic Testing System for Vehicle's Drive Axis Performance Test

Development and Application of Steam Turbine Vibration Sensor Fault Diagnosis and Calibration Instrument

Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument

Design of Automatic Testing System for Whole Plane Aviation Cable

The Designing of Integrated Testing System for the Electric Power System in Large Civil Aircraft

A Dynamic-Balancing Testing System Designed for Flexible Rotor

Design and Application of Aircraft Sub-structure Vibration Test System

Realization of Virtual Frequency Character Testing System for Rudder

The Loading and Test System of Aero Based on LabWindows/CVI

Design and Realization of Measurement and Control System for Aero-engine Lubricating Oil Pump Test-bed

Design of Measurement and Control System for Aero-engine FADEC System Hardware-in-loop Test-bed

The software design of inverter test system based on VC and NI controls

Design on Transmission Accuracy Testing System of Actuator

Design and Implementation of A Test Platform for the Preloaded Assembly of Harmonic Reducer

The Design of A New Type of Spindle Vibration Test Device

Development of Ultrasonic Testing System for Large Cylindrical Parts

Design of Ultrasonic Testing Virtual Instrument System Based on PCI Bus