Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Electro-hydraulic Proportional Control System of Wind Turbine Pitch with Variable Speed and Constant Frequency

STUDY ON ELECTROHYDRAULIC PROPOTION AND PITCH-CONTROLLED TECHNOLOGY OF WIND TURBINE

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Study on Pitch Rate of Electro-Hydraulic Proportional Pitch-Controlled Wind Turbine

Research on Variable-speed Constant-frequency Individual Pitch-controlled Technology Based on Semi-physical Simulation

Pitch Angle Control for Wind Turbine Based on Constant Pressure Network and Hydraulic Motor with Variable Displacement

Design and Experiment of an Electro-hydraulic Proportional Variable Pitch Control System for Tidal Current Turbines

Control system research of MW variable speed constant frequency wind turbine

Study on Variable Pitch Control of Pump Controlled Hydraulic System of Wind Turbine

Coordinated Rotor Speed and Pitch Angle Control of Wind Turbines for Accurate and Efficient Frequency Response

Adaptive Back-Stepping Pitch Angle Control For Wind Turbine Based On A New Electro-Hydraulic Pitch System

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

STUDY ON BLADE PITCHING SYSTEM FOR HORIZONTAL AXIS TIDAL CURRENT TURBINE

Control method for variable speed wind turbines to support temporary primary frequency control

Hybrid Intelligent Feedforward-Feedback Pitch Control for VSWT with Predicted Wind Speed

Design, Modeling and Implementation of a Novel Pitch Angle Control System for Wind Turbine

Hybrid Power Transmission Technology in a Wind Turbine Generation System

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Output Power Control for Variable-Speed Variable-Pitch Wind Generation Systems