Abstract:Alginate fibers made from seaweed have some desirable properties as textile materials, but they also have two shortcomings that limit their usages: they are intolerant to salt, alkali, and detergent, and they are difficult to dye due to the electrostatic repulsion with anionic dyes. To solve the two problems in this project, a process of successive modification of alginate fibers using sodium pyrophosphate, alum, and sodium hydroxide was developed. SEM images and ion content of the modified alginate fibers showed that the fibers did not dissolve in high concentrations of sodium chloride, sodium hydroxide, or standard detergent solution and still maintained their original morphology. Also, the results of FTIR, XPS, XRD, and single-fiber strength tests indicated that the modification process enabled the alginate fibers to form a new tetrahydroxy cross-linking structure and thus improved their mechanical properties. The tetrahydroxy cross-linking structure prevented the dissolution of alginate fibers by blocking the exchange of ions between the fibers and the solution. Besides, the presence of Al 3+ in the tetrahydroxy cross-linking structure modified the electrostatic repulsion between the alginate fiber and the anionic dye, resulting in high dyeing and dye fixation rates. Thus, the modified alginate fiber can be dyed directly with common dyes without dissolution, solving the above-mentioned two problems. This can enormously expand the potential usages of alginate fibers and therefore has significant academic and practical implications.

Preparation and properties of alginate/carboxymethyl chitosan blend fibers

Preparation of Silk Fibroin-Chitosan Blend Membrane and its Property Mensuration

Fabrication and Characterization of Absorbent and Antibacterial Alginate Fibers Loaded with Sulfanilamide

Preparation of alginate–chitosan fibers with potential biomedical applications

Physical Properties and Cell Compatibility of Silk Fibroin-chitosan Blend Membranes

Preparation and Properties of Nano-Silica/Calcium Alginate Blend Fibers

Preparation and Functional Properties of Blend Films of Gliadins and Chitosan

Characterization and Functional Assessment of Alginate Fibers Prepared by Metal-Calcium Ion Complex Coagulation Bath.

Preparation, Structure and Properties of High Strength Alginate Fiber

Studies on Chitosan-Fibroin Blend Membranes (I) - Structure of the Blend Membrane and the Improvement of the Water Adsorption and the Mechanical Property of Fibroin

A New Approach for Preparing Chitosan Fibers from a LiOH/urea Solvent System

Facile preparation of biocompatible and antibacterial water-soluble films using polyvinyl alcohol/carboxymethyl chitosan blend fibers via centrifugal spinning

Antimicrobial fibers based on chitosan and polyvinyl-alcohol

Fabrication of Alginate/chitosan Complex Fibers Via Diffusion Controlled In-Situ Polyelectrolyte Complexation

Anti-dissolution and dyeing properties of Al-modified alginate fibers

Preparation and Properties of Alginate Salt Fibers: an Inherent Flame-Retardant, Biodegradable Fiber

In Situ Modification of Alginate Fibers by Nano-montmorillonite for Enhancing the Mechanical Properties

BLEND FILMS FROM CHITOSAN AND POLYACRYLAMIDE SOLUTIONS

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath

Improvement of Physical Properties of Crosslinked Alginate and Carboxymethyl Konjac Glucomannan Blend Films

Mechanical Properties and Water Absorption of Alginate/hydroxypropyl Methyl Cellulose Blend Membranes with Semi-interpenetrating Network