Abstract:The dynamic modulus (|Em*|) of asphalt mixtures is one of most fundamental mechanical parameters used in flexible pavement design, which has been extensively estimated through various predictive models. However, most of existing dynamic modulus predictive models does not fit well for the purpose of the Level 3 (the lowest input level) flexible pavement design in the current AASHTOWare Pavement ME Design due to the following major deficiencies: (1) lacking physical significance; (2) providing poor prediction accuracy; and (3) requiring laboratory testing to obtain key model parameters. To address these deficiencies, this paper is aimed to develop a new model on the basis of the law of mixtures. First, a large database is collected and revised for the new model development. Two exiting law of mixture models are then evaluated in terms of the mode prediction accuracy, and neither of them provided satisfactory prediction results. A new model is subsequently developed, which involves using a parallel form to represent the contribution of each of three phases (asphalt, aggregate and air void) to the |Em*| as well as utilizing a standard sigmoid function to characterize the mechanical response of asphalt mixture. Statistical analysis shows that the new model has comparable prediction performance with traditional Witczak models, but with significantly lower number of input variables and relatively higher model quality. Supplemental data collected from laboratory tests and independent literature sources finally validate that the new model has the capability to provide an accurate prediction of |Em*| with an R2 value up to 0.90. In these regards, the new model is believed to be a good candidate for the |Em*| prediction of asphalt mixtures for a reliable Level-3 flexible pavement design.

Model for Predicting Mix Quality Based on Multi-Factors

GMPLS Based Intelligent Quality Control for Internal Rubber Mixing Process

GMPLS Model for Mix Quality Prediction and Dump Control

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Quality Monitoring of the Rubber Mixing Process by Using the Discounted-Measurement RPLS Algorithm.

A Multi-Scale Prediction Model Based on Empirical Mode Decomposition and Chaos Theory for Industrial Melt Index Prediction

Adaptive least contribution elimination kernel learning approach for rubber mixing soft-sensing modeling

DISCOUNTED-MEASUREMENT RPLS ALGORITHM AND ITS APPLICATION TO QUALITY CONTROL OF RUBBER MIXING PROCESS

Mathematic Model for Predicting Mix Dispersity in Internal Mixer

Study Of Discharge Modeling Method Using Support Vector Machine For Rubber Mixing Process

Adaptive recursive kernel learning with application to online quality prediction of industrial rubber mixing process

Online prediction of Mooney viscosity in industrial rubber mixing process via adaptive kernel learning method

Real-time rubber quality model based on CNN-LSTM deep learning theory

Viscosity prediction model of natural rubber-modified asphalt at high temperatures

Industrial Mooney viscosity prediction using fast semi-supervised empirical model

Numerical Modelling of Flow Performance of Fresh Concrete Considering Rheological Characteristics

Improved Mechanical Models for Self-Compacting Concrete in the Paste Rheological Thresholds Theory Considering the Pressure Between Particles

Accurate Prediction of Magnetorheological Damper Characteristics Based on a New Rheological Constitutive Model

Improve the Intelligent Convenience of Multivariate Optimization of Concrete Mix Ratio and the Development of Corresponding Applications

Effective viscosity prediction of crude oil-water mixtures with high water fraction

A Rheological Model for Evaluating the Behavior of Shear Thickening of Highly Flowable Mortar