Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Dynamic Optimization System of Entire Process for Coal Blending in Thermal Power Plant

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Study And Application Of Two-Level Optimization Of Coal Blending For Power Plant Based On On-Line Coal Identification

Combinatorial optimization of pulverizers for blended-coal-fired power plant

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Optimization on plant-level AGC coal consumption curve based on operation mode of pulverizing systems

Model Set-up and System Development for Intelligent Coal Blending Based on Integral Optimization of Utility Boilers

An Online Case-Based Reasoning System for Coal Blends Combustion Optimization of Thermal Power Plant

Development of novel dynamic machine learning-based optimization of a coal-fired power plant

Experimental study of sludge disposal in a large coal-fired power plant

Optimization of Circulating Fluidized Bed Boiler Combustion Key Control Parameters Based on Machine Learning

A Complex Evaluation and Optimization Approach for Oxygen-Enriched Combustion Characteristics of Blended Fuels Based on Response Surface Methodology

Boiler Combustion Optimization System Based on Coal Type Identification

Optimization of BF pulverized coal blending based on TOPSIS method

Study and Development of Expert System for Coal Blending at Power Plant

A Novel Non-Linear Programming-Based Coal Blending Technology for Power Plants

Simulation of Power Generation System with Co-Combustion of Coal and Torrefied Biomass by Flue Gas

A new on-line combustion optimization approach for ultra-supercritical coal-fired boiler to improve boiler efficiency, reduce NOx emission and enhance operating safety

Dynamic modeling and control for pulverized-coal-fired oxy-combustion boiler island

Online optimization of boiler operation based on information integration and case-based reasoning

Data-driven based multi-objective combustion optimization covering static and dynamic states