Abstract:Targeting the removal of Pb2+ in wastewater, cellulosic materials were carbonized in an aerobic environment and activated via ion exchange. The maximum adsorption capacity reached 243.5 mg/g on an MCC-derived adsorbent activated with sodium acetate. The modified porous properties improved the adsorption capacity. The capacity could be completely recovered five times through elution with EDTA. Because of the negative effects of Ni, Mg, and Ca elements, the adsorption capacities of activated carbonized natural materials were lower than that of pure cellulose. N2 adsorption measurement showed that the adsorbent had a large specific surface area as well as abundant micropores and 4-nm-sized mesopores. FTIR and surface potential results proved that carboxyl group was generated in the aerobic carbonization, and was deprotonated during ion exchange. This adsorbent consisted of C-C bonds as the building blocks and hydrophilic groups on the surface. XPS results demonstrated that the Pb 4f binding energies were reduced by 0.7-0.8 eV due to the interaction between Pb2+ and the activated adsorbent, indicating that the carboxylate groups bonded with Pb2+ through coordination interactions. Pseudo-second-order and Elovich kinetic models were well fitted with the adsorption processes on the pristine and activated carbonized adsorbents, indicative of chemisorption on heterogeneous surfaces. The Freundlich expression agreed well with the data measured, and the pristine and activated adsorbents had weak and strong affinities for Pb2+, respectively. The Pb2+ adsorption process was exothermic and spontaneous, and heat release determined the spontaneity. The adsorption capacity is attributed to the carboxylate groups and pores generated in the aerobic oxidation and ion exchange procedures.

Adsorption of copper and lead species at electrochemically activated glassy carbon electrodes

Investigation of Cu Adsorption and Migration with Spectral Induced Polarization in Activated Carbon

Preparation of Carbon Aerogel Electrode for Electrosorption of Copper Ions in Aqueous Solution

Monitoring of copper adsorption on biochar using spectral induced polarization method

Heavy Metal Ion Sorption Properties of Porous Glass Beads with a Core‐Shell Structure

Schizophrenic autism. 1. Historical evolution and perspectives.

Equilibrium, Kinetic, and Diffusion Mechanism of lead(II) and cadmium(II) Adsorption onto Commercial Activated Carbons

Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Adsorption Behavior of Copper Ions on Graphene Oxide–chitosan Aerogel

Pectin/Activated Carbon-Based Porous Microsphere for Pb2+ Adsorption: Characterization and Adsorption Behaviour

Comparative study on the adsorption of lead ions by kaolin loaded chitosan by different modification methods

Graphene oxide/polydopamine modified montmorillonite/carboxymethyl chitosan composite aerogel for efficient removal of Pb 2+ , Cu 2+ , and Cd 2+ : Adsorption behavior, mechanism and DFT study

Alginate-based adsorbents with adjustable slit-shaped pore structure for selective removal of copper ions

Adsorption mechanism of Cu(II) ions from aqueous solution by glutaraldehyde crosslinked humic acid-immobilized sodium alginate porous membrane adsorbent

Copper adsorption on chitosan–cellulose hydrogel beads: behaviors and mechanisms

Removal of Copper and Lead from Aqueous Solution by Adsorption Onto Cross-Linked Chitosan/Montmorillonite Nanocomposites in the Presence of Hydroxyl–Aluminum Oligomeric Cations: Equilibrium, Kinetic, and Thermodynamic Studies

[Preparation and Pb2+ Electrosorption Characteristics of Graphene Hydrogels Electrode].

Adsorption of Pb(II) and Cd(II) by magnetic activated carbon and its mechanism

Adsorption of Pb(II) in water by modified chitosan-based microspheres and the study of mechanism

Removal of Pb (II) and V (V) from aqueous solution by glutaraldehyde crosslinked chitosan and nanocomposites

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source