Abstract:Great progress has been carried out on the Micro Total Analysis System (μTAS) in recent years, in which the chemical analysis system is miniaturized by micromachining. This system can reduce reagent consumption, dispersion effects and analysis time. Nowadays, μTAS devices are beginning to make significant contributions to biotechnology, biomedicine and drug discovery. Meanwhile, due to the difficulties of controlling fluid motion in such a small scale, fluid flow driven in microfluidic devices has received increasing attention. So far electroosmotic flow (EOF) is one of the most popular and important fluid driven techniques in microfluidic devices because in an EOF the velocity profile is plug-like and the mean velocity is independent of the cross-sectional area, as well as its valveless control of fluid flow. Therefore, electro-osmotic flow can offer significantly less deleterious dispersive effects than pressure-driven flow and provide a favored high-performance sample separation technique. Due to its importance, electroosmotic flow in microchannels has received considerable attentions recently and been investigated both numerically and experimentally. However, fluid flow in microfluidic devices is often through channels with changes in cross-sectional area, and/or channels with bends and bifurcations, which make a great difference to velocity profile, pressure distribution and so on. A systematic study of these different configurations will provide valuable insight into the flow physics. The goal of the present study is to undertake a numerical study of EOF in microchannels with a sudden expansion in order to identify the factors affecting the flow. The present work is in the use of an incompressible lattice-Boltzmann model with a forcing term which is perhaps better suited to microflows than the conventional Navier-Stokes solvers. The impact of expansion ratio (ER), ionic molar concentration (c ∞), external electric potential and zeta potential on the flows are investigated. Numerical results including velocity profile, pressure distribution and external electrical potential distribution have been presented. It has been shown that boundary layer separation has been suppressed by the electroosmotic force exerted on the fluid near walls. Moreover, a sudden change in the channel has a great influence on the electroosmotic flows. A jump has been found in fluid velocity, pressure drop at the junction, as well as electrical potential due to EDL. The external electrical potential is linear along the axis of the channel but a turning point emerges at the junction. Non-linear pressure drop in the narrow channel becomes more obvious as ER increases. Results also show that velocity profile at the outlet depends on ER and c ∞. The convex velocity profile turns to concave one as ER or c ∞ increases, resulted from interactions between adverse pressure gradient and electric force exerted on the fluid in the middle of channel.

Investigation on Tangential Flow Streaming Potential Measurement Technology of Charged Nanofiltration Membrane

Characterization of Surface Electrokinetic Property of Nanofiltration Membranes by Streaming Potential Measurements

Research on Stream Potential of Nanofiltration Membrane

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

RESEARCHES ON STREAMING POTENTIAL AND ZETA POTENTIAL OF NANOFILTRATION MEMBRANE

Pressure Modulation of Ion Conductance and Selectivity in Nano-channels with Weakly Overlapping Electrical Double Layers

Experimental Investigation of Transmembrane Potential of Pressure-Dressed Membrane Process in Electrolyte Solutions

Ion adsorption on nanofiltration membrane surface and its effect on rejection of charged solutes: A zeta potential approach

Analysis of Electro-Osmotic Flow Characteristics at Joint of Capillaries with Step Change in ζ -Potential and Dimension

Modeling on Electrokinetic Phenomena of Charged Porous Membrane

Water Compression Induced Ionic Negative Differential Resistance in Nanopores.

Analysis Of Electro-Osmotic Flow Characteristics At Joint Of Capillaries With Step Change In Zeta-Potential And Dimension

Determination Of Zeta-Potential By Measuring Electroosmotic Flux In An Alternating Electric Field And Its Applications In The Study Of Membrane Fouling

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS

Evaluation of Four Measurement Operation Modes of Streaming Potential for Microfiltration and Ultrafiltration Membranes

LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC FLOWS IN MICROCHANNEL WITH A SUDDEN EXPANSION

Critical operation factors and proposed testing protocol of nanofiltration membranes for developing advanced membrane materials

Streaming Potential Analysis and Electrokinetic Energy Conversion Efficiency of Two Immiscible Fluids in a Nanochannel

Rigorous Determination of Pore Size Non-Uniformity for Nanofiltration Membranes by Incorporating the Effects on Mass Transport

Nanofiltration Understanding: A Separation Process of Molecular-Level with Nano-Scale Effect

Effect of Surface Electrical Properties on Rejection Performance of the Charged Membrane