Abstract:Mold temperature control in injection molding is very important for control of production rate and product quality. However, mold temperature is a complex function of machine design, process variables, machine settings and ambient conditions. Data were obtained regarding the variability in both space and time (in-cycle and cycle-to-cycle) of mold metal and mold surface temperatures and heat flux. In view of this variability, it is necessary to define variables which may be useful for control purposes. The following variables were evaluated. cycle average temperature, peak temperature, and partial cooling time. Dynamic models were developed, on the basis of experimental data, to determine the process gains, time constants and time delays for the above variables with regard to coolant temperature, coolant flowrate, and melt temperature as the possible manipulated variables. In view of the dynamic studies, the cycle average surface temperature was selected as the controlled variable for control system design and simulation. The regulating abilities of PI, PID, and Dahlin controllers were evaluated. The results indicate that Dahlin control caused the controlled variable to follow the set-point closely, even when the process parameters vary, thus showing good robustness. However, the Dahlin algorithm achieves this advantage via large variations in the manipulated variable. This may cause difficulty in some circumstances.

Injection Molding Control: from Single Cycle to Batch Control

Research and Application of Advanced Process Control for Plastic Injection Molding Machine Temperature

A Closed-Loop Multivariable Quality Control Scheme for Injection Molding Process

Batch process control from practice to 2D model predictive control

Injection velocity control using 2D model predictive iterative learning algorithm

Research on Velocity Control in Precise Injection Molding Based on RBF Neural Network

Application of Two-Dimensional Predictive Functional Control in Injection Molding

Adaptive Control of Injection Velocity of Thermoplastics Injection Molding

Integrated Design Method of A Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes

INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER

Batch Process Control, from Traditional Approaches to 2D Control

Overall Control System for Injection Molding Process

Two-time-dimensional Model Predictive Control of Weld Line Positioning in Bi-Injection Molding

Integrated Direct/Indirect Adaptive Robust Control for Electrical Driven Injection Machine Mold Closing with Accurate Parameter Estimations.

Adaptive control of the filling velocity of thermoplastics injection molding

Injection Velocity Control of Thermoplastic Injection Molding Via A Double Controller Scheme

Intelligent Injection Molding on Sensing, Optimization, and Control

Fuzzy Multi‐model Based Adaptive Predictive Control and Its Application to Thermoplastic Injection Molding

Dynamics and Control of Surface and Mold Temperatures in Injection Molding

Cycle‐to‐cycle and Within‐cycle Adaptive Control of Nozzle Pressure During Packing‐holding for Thermoplastic Injection Molding

Objectives, challenges, and prospects of batch processes: Arising from injection molding applications