Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Numerical Simulation of the Influence of the Length-to-depth Ratio on Flow Field and Energy Loss Characterization Within Rectangular Cavities

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Numerical Simulation for Rarefied Hypersonic Flows over Non-Rectangular Deep Cavities

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Simulation of flow around two rotating cylinders in a side-by-side arrangement at long channel using LB-DF/FD method

3-D numerical simulation of circulating flow in the square cavity

Numerical Simulation of Velocity Field of Flow Around Square Cylinder

Numerical simulation of cavitation performance for vortex diode

Numerical Simulation of the Influence of the Lengths of Exit Tubes on the Internal Flow Field of Cyclone Separators

Large eddy simulation of tip leakage cavitating flow focusing on cavitation-vortex interaction with Cartesian cut-cell mesh method

Three dimensional numerical simulation of flow past a square cylinder using CFX

Numerical simulation of water entry of an inclined cylinder

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Numerical Simulation of Cavitation for 3-D ALE15 Hydrofoil

Numerical investigation of cavitation vortex dynamics in different cavitation patterns coupled implicit large eddy simulation and boundary data immersion method

Numerical Simulation on the Cavitation Flow of High Speed Oblique Water Entry of Revolution Body

Numerical Simulation of Power-Law Fluid Flow in a Trapezoidal Cavity using the Incompressible Finite-Difference Lattice Boltzmann Method

Numerical investigation on the cavity dynamics and multiphase flow field evolution for water entry of vertical cylindrical shell

Turbulent Flow Simulation Using Large Eddy Simulation Combined with Characteristic-Based Split Scheme

Effect of the Inlet Boundary Conditions on the Flow over Complex Terrain Using Large Eddy Simulation