Analysis of network-induced delay and control strategy based on Ball-Beam networked control system
Liang Jun,Gui Weihua,Wu Xiaofeng
DOI: https://doi.org/10.3969/j.issn.1001-4160.2011.07.021
2011-01-01
Abstract:The ball-beam system consists of a long beam which can be tilted by a servo or electric motor together with a ball rolling back and forth on top of the beam.It is a popular textbook example in control theory.The significance of the ball-beam system is that it is a simple system which is open-loop unstable.Even if the beam is restricted to be very nearly horizontal,without active feedback,it will swing to one side or the other,and the ball will roll off the end of the beam.To stabilize the ball,a control system which measures the position of the ball and adjusts the beam accordingly must be used.In two dimensions,the ball-beam system becomes the ball and plate system,where a ball rolls on top of a plate whose inclination can be adjusted by tilting it frontwards,backwards,leftwards,or rightwards.When the data of the ball-beam system is transferred through the network,the system can be referred to as a networked control system.In this system,the scale of network nodes is small, the information flows smooth,and the network load is low.For control,the network-induced delay of the ball-beam system is the most concerned. After analysis,the time-varying but piecewise constant delay is hypothesized.Then,the distributed delays are equivalently lumped together as a single delay.On the other hand,a method of delay-measuring is proposed.Based on that,a reasonable control strategy is designed.Compensating by Smith compensator,the ball-beam networked control system is simulated,and the result shows the effectiveness of the control strategy.