Utilization of Furnace Ash and Slags for Adsorption of Nitrobenzene from Groundwater

Jun Yin,Lei Liu,Liguo Zhang,Zhisheng Liu

DOI: https://doi.org/10.1089/ees.2006.0289

IF: 2.1723

2008-01-01

Environmental Engineering Science

Abstract:In order to find a low-cost adsorbent for removal of nitrobenzene from groundwater, we prepared samples containing nitrobenzene with groundwater typical in Jilin province, used pretreated furnace ash and slags as adsorbents, measured heavy metals leached out from furnace ash and slags and investigated adsorptivity of nitrobenzene on the adsorbents. While the experimental results indicate that the equilibrium data are well modeled with the pseudo-second-order kinetic model for all adsorbents, the intraparticle diffusion model can be only applied to furnace ash. Furnace ash has a larger adsorption capacity than furnace slags due to its relatively larger specific surface area. According to the Freundlich isotherm model, furnace ash and slags with the grain size below 1.25 mm represent beneficial adsorption for nitrobenzene, but slags of other grain sizes do not represent beneficial adsorption; however, their correlation coefficients can be improved using the modified Freundlich model. Disposal of furnace ash and slags can be made safe by calcination at 300 degrees C for 1 h. Through cost-effectiveness analysis, we come to the conclusion that furnace ash and slags can be only used for the remediation of water or groundwater, and furnace ash can be used as a low-cost adsorbent if the removal of turbidity and leachable heavy metals are considered beforehand.