Abstract:Research on the curing reaction mechanism of a novel epoxy resin with self‐healing properties and thermal stability based on nth‐order and autocatalytic kinetic models. The reaction process and curing mechanism of self‐healable epoxy resin TGDDM and curing agent TA are complicated. In this paper, the curing reaction kinetic mechanism of the system is studied from the perspective of isoconversional models. The nth‐order model and autocatalysis model are established for observations of heat flow versus temperature and time during real‐time curing obtained by non‐isothermal differential scanning calorimetry (DSC), and evaluated under the standards of MSE, RMSE, and R‐square. Under the guidance of least squares fitting, the pre‐exponential factor (A), the activation energy (Eα ), the order of models (n, m) and other parameters in fα of the model are mainly estimated by Kissinger method, Ozawa method, Malek method, and other methods. The correlation between the activation energy (Eα ) of the reaction and the degree of conversion α also analyzed by the Flynn‐Wall‐Ozawa method. The chemical reaction of the system is studied by Fourier transform infrared (FTIR) and the self‐healing property of the system is characterized by scanning electron microscope (SEM). It was found that the esterification reaction occurred in the system, and the realization of the self‐healing property was also due to the transesterification reaction. In addition, the effect of the accelerator on the system is analyzed by the established autocatalysis model and dynamic mechanical analysis (DMA). The result shows that the addition of the accelerator does not change the curing reaction mechanism of the system, but accelerated the reaction process and increased the glass transition temperature.

EPOXY RESIN CURING REACTION STUDIED BY DYNAMIC AND ISOTHERMAL MODEL FREE KINETICS

Model-Fitting and Model-Free Nonisothermal Curing Kinetics of Epoxy Resin with A Low-Volatile Five-Armed Starlike Aliphatic Polyamine

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Studies on Cure Kinetics of Diglycidyl Ether of 4,4′-Bisphenol/4,4′-diaminobiphenyl Using the Advanced Isoconversional Method

Synthesis and Curing Kinetic Analysis of Eugenol-Based Siloxane Epoxy Resin

Shifting of the Curing Kinetics of E-51 Epoxy Resin

Study on the Cure Kinetics of Middle Temperature Curing 3234 Epoxy Resin System

The Curing Kinetics Analysis of Four Epoxy Resins Using a Diamine Terminated Polyether as Curing Agent

Cure Kinetics of Tgddm/Dds System Studied by Non-Isothermal Method

CURING KINETIC MODEL OF THE 2-ETHYL-4-METHYLIMIDAZOLE/EPOXY SYSTEM

Curing Kinetics of DGEBA/Polyether Amine by Isothermal DSC

CURE KINETICS AND CHEMORHEOLOGICAL BEHAVIOR OF EPOXY RESIN USED IN ADVANCED COMPOSITES

Effect of Curing Agent Type on Curing Reaction Kinetics of Epoxy Resin

Cure Kinetics Characterization Of Epoxy Resin By Piecewise Model Fitting Method

Cure Kinetics of Epoxy Resin Used for Advanced Composites

Exploring the Impact of Molecular Structure on Curing Kinetics: A Comparative Study of Diglycidyl Ether of Bisphenol A and F Epoxy Resins

Isoconversional models toward the curing kinetics of self‐healable epoxy resin TGDDM and acid anhydride

Study on Curing Kinetics of Epoxy Resin by In-situ and Ex-situ FTIR

Establishment and verification of curing kinetics model of 603 epoxy resin system

Kinetic Analysis of the Curing of a Partially Biobased Epoxy Resin Using Dynamic Differential Scanning Calorimetry