Production of Electricity from Phenol Using a Microbial Fuel Cell
Haiping LUO,Guangli LIU,Renduo ZHANG,Jin Song
DOI: https://doi.org/10.3321/j.issn:0253-2468.2008.07.003
2008-01-01
Abstract:A two-chambered microbial fuel cell (MFC) was constructed and inoculated with mixed aerobic and anaerobic activated sludge collected from a sewage treatment plant. The MFC reactor was designed to test the potential for pollutant degradation and simultaneous generation of electricity, using various substrates, such as glucose, a glucose-phenol mixture, and phenol. The MFC using glucose as fuel had the shortest start-up time, while the start-up time of the MFC using phenol was the longest. Removal efficiencies of phenol and COD (chemical oxygen demand) were up to 85% and 80%, respectively, in all tests of the MFC. In addition, removal of phenol in the MFC reactor was compared using an anode electrically connected or disconnected to the cathode, with the same operation time. During the experiments, the electric cycle was operated for 400, 200, and 100 h for the glucose, mixed glucose-phenol, and phenol substrates, respectively. The maximal voltage outputs obtained were 551, 208, and 121 mV (based on external resistance of 1000Ω)for glucose, glucose-phenol mixture, and phenol, respectively. For glucose, glucose-phenol mixture, and phenol, the maximal power outputs were 121, 16, and 6 mW·m-2(anode), respectively. The results indicated that phenol could be used in the MFC for generating power while at the same time effectively accomplishing biodegradation. The MFC technology may provide a new method to offset operating costs, making advanced remediation measures for difficult to degrade organic materials more affordable for practical applications.