Abstract:Micro thin-walled structure of aluminum alloy LF 21 has a strong ability to reflect electromagnetic waves and is widely used in waveguide radar antenna. Micro-milling technology is a potentially effective technique for machining micro thin-walled structure of LF 21. However, LF 21 has the characteristics of low strength and hardness and high plasticity and is prone to plastic flow under cutting force, resulting in extrusion, accumulation, and other defects and easy to produce burrs. Then the surface roughness and surface residual stress are difficult to guarantee. To ensure the machining quality of micro-milling thin-walled LF 21, a 3D simulation model of micro-milling LF 21 process is established based on Abaqus to output residual stress. The validity of the residual stress output is verified by experimental results. Four-factor and three-level orthogonal simulation experiments are conducted, and a prediction model of residual stress is established based on the simulation results. Based on the response surface method (RSM), four-factor and five-level center composite design (CCD) experiments are conducted to establish a surface roughness prediction model and a top burr size prediction model. The validity of the built prediction models is verified by experiments. Multi-objective optimization (the minimum surface roughness, the minimum top burr size, and the maximum surface compressive residual stress) is transformed into single-objective optimization by using the analytic hierarchy process (AHP)-entropy weight method. Genetic algorithm (GA) is used to solve the above optimization problem, and the optimal machining parameters of micro-milling LF 21 are achieved. The optimal micro-milling parameters are as follows: the spindle speed n is 62,000 r/min, the axial depth of cut ap is 70 μm, the radial depth of cut ae is 65 μm, and the feed per tooth fz is 0.95 μm/z.

Optimization of Multiple Cut on HS-WEDM Based on Genetic Algorithm

Parameter Optimization For Surface Roughness Of Multiple Cut On Hs-Wedm Based On Genetic Algorithm

Machining Parameter Optimization of Milling Process Based on Uniform Design

Optimization Empty Run for CNC Multi-contour Processing

Research on Multi-cutting Processing of HS-WEDM based on Orthogonal Experiment

Machining Parameters of WEDM Based on Orthogonal Experiments

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Multi-objective Optimization of Non-circular Gear Through Orthogonal Array and Fuzzy Comprehensive Evaluation Method in WEDM

Approach optimizing tool paths arrangement based on genetic algorithm

An Effective and Automatic Approach for Parameters Optimization of Complex End Milling Process Based on Virtual Machining

Machining Parameters Optimization of Milling Process Based on Genetic Algo Rithms

Optimization of Cutting Conditions in Ultra-Precision Turning Based on Mixed Genetic-Simulated Annealing Algorithm

Research on machining parameter optimization in finishing milling with multiple constraints

Optimization of Cutting Conditions of YG15 on Finish Cutting in WEDM Based on Taguchi Method

Multi-objective optimization of machining parameters in micro-milling LF 21 based on the AHP-entropy weight method

Process parameter modeling and multi-response optimization of wire electrical discharge machining NiTi shape memory alloy

Evaluation and Optimization Method of High Speed Cutting Parameters Based on Cutting Process Simulation

Optimization of Cutting Parameters for Trade-off among Carbon Emissions, Surface Roughness, and Processing Time

Worksteps Sequencing and Optimization of Mill/turn Machining Center Based on Improved Genetic Algorithm

Feature-based optimization method integrating sequencing and cutting parameters for minimizing energy consumption of CNC machine tools