Abstract:Atom transfer radical polymerization(ATRP) was applied to prepare an amphiphilic azobenzene-containing ABA triblock copolymer PMAA-b-PMAZOCNb-PMAA.In the presence of(4,4′-di(n-nonyl)-2,2′-)bipyridine(bpy9) and CuBr(as the catalyst),the dibromo-initiator butylene di(2-bromoisobutyrate) was reacted with the azobenzene-containing monomer,6-[4-(4′-cyanophenylazo)phenoxy]hexyl methacrylate(MAZOCN),which resulted in the macro-initiator.The absolute molecular weight of the macro-initiator was obtained by GPC-SLS(gel permeation chromatography-static light scattering) method.The dn/dc of the macro-initiator was predetermined as 0.257 mL/g by the refractometer.Then CuCl was used as the catalyst,and the macro-initiator further reacted with the tert-butyl methacrylate to obtain the triblock copolymer PtBMA-b-PMAZOCN-PtBMA as a precursor.From()~1H-NMR,the polymerization of tBMA monomers initiated by the macro-initiator was proved by the presence of a rather strong resonance at δ=1.43 which is corresponding to the tert-butyl group.A single Gaussian peak in the GPC curves further proved the narrow polydispersity of the resultant precursor triblock copolymer.The absolute molecular weight of the triblock copolymer was obtained by combination of the segement molar ratio determined from the characteristic ~1H-NMR peaks and the absolute molecular weight of the macroinitiator.In the final step,the tert-butyl groups were removed by the selective hydrolysis reaction with trifluoroacetic acid at room temperature.~1H-NMR analyses proved that most of the tert-butyl groups were hydrolyzed(conversion 95%),while the ester groups in the azo blocks were retained.These monomers and polymers were then studied with PLM(polarized light microscopy) and DSC(differential scanning calorimetry).The monomer,macro-initiator and the precursor triblock copolymer are all own smectic phase in the liquid crystalline region,while no characteristic liquid crystalline texture could be observed for the amphiphilic triblock copolymers.It is possibly because that,the presence of H-bonds between carboxyl groups hindered the development of the liquid crystalline phase.The amphiphilic ABA triblock copolymer possessed hydrophilic blocks in the outer part and the hydrophobic block in the central part.The vesicular aggregates of the polymer were obtained by gradually adding water,which is the good solvent of the hydrophilic block and the poor solvent of the azobenzene-containing liquid crystalline block,into the stirring THF solution of the amphiphilic copolymer.When the water content was more than 50% volume ratio,an excessive amount of water was added to freeze the assembly of the copolymer.THF was removed from the mixed solvent by dialyzed against ultrapure water for days.The TEM(transmission electron microscopy) observation showed that the amphiphilic block copolymer self-assembled into vesicular aggregates with average diameters from 300 to 500 nm.By using a high-pressure mercury lamp as the light source,the vesicular aggregates transform to the colloidal spheres when irradiated with the ultraviolet light in the solid state.

Novel ABC2-type Liquid-Crystalline Block Copolymers with Azobenzene Moieties Prepared by Atom Transfer Radical Polymerization

Synthesis and Characterization of Side‐chain Liquid Crystalline ABC Triblock Copolymers with P‐methoxyazobenzene Moieties by Atom Transfer Radical Polymerization

One-pot Synthesis of Octablock Copolymers of High-Molecular Weight Via RAFT Emulsion Polymerization

Novel Amphiphilic Diblock and Triblock Liquid-Crystalline Copolymers with Well-Defined Structures Prepared by Atom Transfer Radical Polymerization

Synthesis of Well-Defined ABC Triblock Copolymers with Polypeptide Segments by ATRP and Click Reactions

A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

ABA-type amphiphilic triblock copolymers containing p-ethoxy azobenzene via atom transfer radical polymerization: synthesis, characterization, and properties

Synthesis of a Novel ABC Triblock Copolymer with a Rigid-Rod Block via Atom Transfer Radical Polymerization

Synthesis of Side Chain Liquid Crystal-Coil Diblock Copolymers with P-Methoxyazobenzene Side Groups by Atom-Transfer Radical Polymerization

Synthesis of Water-Soluble Abc Triblock Copolymers Containing Polypeptide Segments

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

Synthesis and Characterization of H-type Amphiphilic Liquid Crystalline Block Copolymers by ATRP

Syntheses and characterization of ABA type amphiphilic block copolymers

Synthesis of Azobenzene‐containing Side Chain Liquid Crystalline Diblock Copolymers Using RAFT Polymerization and Photo‐responsive Behavior

Synthesis and Characterization of ABA-Type Triblock Copolymers Using Novel Bifunctional PS, PMMA, and PCL Macroinitiators Bearing p-xylene-bis(2-mercaptoethyloxy) Core

Synthesis of Ab-Type Block Copolymers Containing Benzoxazole and Anthracene Groups by Atrp and Fluorescent Properly

Synthesis, Characterization and Self-Assembly of an Azobenzene-Containing Amphiphilic Aba Triblock Copolymer

Preparation and Characterization of Linear and Miktoarm Star Side-Chain Liquid Crystalline Block Copolymers with P-Methoxyazobenzene Moieties Via A Combination of Atrp and Rop

A Facile Synthesis of Cleavable Block Copolymers Via Tandem Polymerizations of NMRP and ATRP

Synthesis of Diblock Copolymers by Combining Stable Free Radical Polymerization and Atom Transfer Radical Polymerization

Self-Assembly and Photo-Responsive Behavior of Novel Abc(2)-Type Block Copolymers Containing Azobenzene Moieties