Abstract:Fracture mechanics and the crack propagation in reinforced concrete members is one of the most important approaches to structural safety analysis. Thanks to powerful software and increasingly fast computers, numerical simulation is well suited to analyse even more complex problems, such as crack growth, quickly and economically. In order to validate these analyses in their application, however, it is still necessary to confirm and compare numerous models of load-bearing and material behaviour by experimental investigations. This paper presents nonlinear numerical simulations of bending and shear crack propagation in reinforced concrete beams without transverse reinforcement. The smeared and discrete crack growth of haunched and non-haunched beams is analysed. Compared are the load deformation behaviour and curves which show the crack width in relation with the applied load without building a notch in the structure. The obtained results are presented with different mesh densities. The tests and the numerical simulations will provide a broad interpretation of crack growth and redistribution of inner forces in concrete members. As numerical method to map discrete cracks the extended finite element method (XFEM) is applied. For validation, the crack patterns of real experiments are compared with the results of the different finite element models up to two crack initiations. The evaluation is based on single span beams under bending and shear. The numerical simulations make it possible to predict the fracture behaviour of concrete members and shows good agreement with the experimental results.

A Finite Element Simulation Procedure and Its Realization for Crack Growth

A Finite-Volume Implementation of the Phase-Field Model for Brittle Fracture with Adaptive Mesh Refinement

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Numerical simulation of interference of fatigue growth of co-plane cracks

An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions

Nonplanar Crack Growth Simulation of Multiple Cracks Using Finite Element Method

An Adaptive Extended Finite Element Based Crack Propagation Analysis Method

A Non-Matching Finite Element-Scaled Boundary Finite Element Coupled Method for Linear Elastic Crack Propagation Modelling

Numerical Simulation of Crack Growth of Reinforced Concrete Beam Based on XFEM

Improvements for the solution of crack evolution using extended finite element method

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Parametric simulation method for 3-D non-planar crack propagation

Simulation of Quasi-Static Crack Propagation by Adaptive Finite Element Method

An Enhanced Finite Element Method with Separate Mathematical and Physical Mesh(ii): Application in Propagation of Cohesive Crack

Extended embedded crack finite element method for modeling localized failures in concrete structures

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)

Simulation of crack growth in reinforced concrete beams using extended finite element method