Abstract:Purpose The Bernoulli gripper fixedly installed on the manipulator is subject to limitations such as a small-working region and poor anti-interference capacity. This paper aims to propose a novel Bernoulli gripper design that involves the connection of a positive stiffness component such as a spring in series, based on the force characteristic curve synthesis method, to optimize the mechanical performance. Design/methodology/approach The proposed gripper is designed and manufactured. In the suction procedure, the force characteristic curve of the proposed gripper is theoretically and experimentally investigated. In the hovering detection procedure, a dynamic model of the manipulator-gripper-workpiece system is established, and an apparatus is set up to compare the displacements of the workpiece and the manipulator. The proposed gripper is finally applied in the lifting procedure, showing good impact resistance. Findings The optimization of mechanical performance of the proposed gripper is realized. The proposed gripper has the effect of increasing the stiffness of the negative stiffness part of the force characteristic curve and reducing the stiffness of the positive stiffness part, increasing the working region. The stability and the anti-interference ability of the workpiece under high-frequency vibration are improved. Meanwhile, the impact resistance in the lifting procedure is enhanced, compared with the original one. Originality/value This research proposes a novel design for the Bernoulli grippers to optimize the mechanical performance. The proposed gripper has advantages of a larger working region, better anti-interference ability and better impact resistance. These findings serve as important theoretical and experimental references for the design of the Bernoulli gripper.

Kinematic Design of a Radius-Variable Gripper with 1-D.O.F. Used in High-voltage Hot-line Cleaning Robot

The Optimum Design of a Radius Variable Manipulator Applied in High-voltage Hot-line Cleaning Robot

Design of a Large-Range Rotary Microgripper with Freeform Geometries Using a Genetic Algorithm

Genetic Algorithm for the Design of Freeform Geometries in a Large-Range Rotary Microgripper

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and Control of a Hydraulic Driven Robotic Gripper

Kinematic Design of a 2R1T Robotic End-Effector with Flexure Joints

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Design of Humanoid Robotic Hand Based on Link Underactuation

Design of A Hybrid-Type Electrostatically Driven Microgripper Integrated Vacuum Tool

A Robot Gripper with Differential and Hoecken Linkages for Straight Parallel Pinch and Self-Adaptive Grasp

Design and development of a variable structure gripper with electroadhesion

Bionic design of universal gripper for nursing robot with hybrid joints and variable Equivalent Link Length

A Variable Stiffness Gripper with Reconfigurable Finger Joint for Versatile Manipulations

Design, Analysis and Experimental Investigations of a Double-Arm Based Micro-Gripper for Thin and Flexible Metal Wires Manipulation

Optimization of mechanical performance of a Bernoulli gripper based on the force characteristic curve synthesis method

Design and Optimization of the Magnetic Field-Driven Spherical Gripper with Adjustable Stiffness

Design of a novel three-DOF high-speed and high-precision manipulator

Concentric Rotation Pin Array Gripper for Universal Grasp

Design and Parameter Optimization of a Three-Claw Underastatctuated Gripper

A Structural Optimization Design Method of Planar Hybrid Gripper