Abstract:Ash deposition is a critical issue concerning the energy utilization and safety operation of heat exchangers. Efficient dynamic evaluation of deposition morphology and reasonable structural parameters contribute to the deposition prediction and the improvement of deposition resistance. In this work, a transient deposition model is established to investigate the dynamic deposition behavior and comprehensive performance. To realize the real-time update of deposition layer morphology, a simple and easy-to-implement dynamic mesh smoothing method based on inverse distance weighted (IDW) interpolation is proposed and then validated by experiments. The effect of the deposition layer dynamic evolution on the particle impact characteristics and the thermal-hydraulic performance of tube bundles is highlighted. In addition, parametric studies are performed on the tube arrangement to obtain the optimal comprehensive performance design. The results show that the angles and velocities of particles impacting the first tube and downstream tubes present a triangular distribution and a butterfly-shaped spatial distribution, respectively. Due to the guidance of the deposition layer on the trajectory of gas and ash particles, the particle impact region on the windward side is more concentrated when using the dynamic mesh model, and the entrainment of small-sized particles is intensified. Besides, the rise in longitudinal spacing significantly exacerbates the deposition and heat transfer deterioration. According to the comprehensive evaluation, the case at S L /D = 2.5 exhibits a higher deposition resistance and heat transfer performance. These results can provide more realistic predictions and indications in practical thermos-equipment design.

Prediction of ash deposition in ash hopper when tilting burners are used

THE SIMULATION OF PARTICLE DEPOSITION IN ASH HOPPER WHEN NOZZLES TILTED DOWNWARDS

A MODEL FOR PREDICTING HEAT TRANSFER PROCESS WITH COAL ASH DEPOSITION IN UTILITY BOILERS

Investigation On The Ash Deposition Of A Radiant Syngas Cooler Using Critical Velocity Model

Simulation of Ash Deposit in A Pulverized Coal-Fired Boiler

Dynamic CFD modeling and evaluation of ash deposition behaviors during Zhundong coal combustion

RESEARCH ON ASH- CLINKER DEPOSITION PERFORMANCE IN WATER - COOLED BOT TOM ASH HOP PER WHILE BURNERS TILTING DOWN

Numerical simulation and mathematical models of ash deposition behavior considering particle properties and operating conditions

Understanding the Ash Deposition Formation in Zhundong Lignite Combustion Through Dynamic CFD Modelling Analysis

Dynamic evaluation of ash deposition behavior and parametric study using an inverse distance weighted interpolation dynamic mesh method

SLAGGING ANALYSIS AND PREVENTION OF UTILITY BOILERS WITH TILTING BURNERS

Ash Deposition Characteristics on Heating Surface in Biomass Circulating Fluidized Bed Boiler

CFD modeling of hydrodynamics, combustion and NOx emission in a tangentially fired pulverized-coal boiler at low load operating conditions

Simulating growth of ash deposit in boiler heat exchanger tube based on CFD dynamic mesh technique

Understanding the effects of mesh smoothing methods in the CFD modelling of Zhundong lignite ash deposition

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Prediction of Ash Deposition in a Biomass Boiler Using Thermomechanical Analysis

A Numerical Study of Ash Deposition Characteristics in a 660MW Supercritical Tangential Boiler

Simulation of Ash Deposition in Different Furnace Temperature with a 2D Dynamic Mesh Model

Effects of burner tilt angle on the combustion and NOX emission characteristics of a 700 MWe deep-air-staged tangentially pulverized-coal-fired boiler

Prediction on pulverized coal combustion process in the boiler using computer simulation