Abstract:Compared with the four-phase optical structure, the grating encoder based on two-phase optical structure reduces the number of optical devices used in the system and makes the system more compact. Due to the high requirements for realtime and parallel processing of algorithm solution, the powerful parallel computing ability of Field Programmable Gate Array (FPGA) and customized hardware acceleration algorithm are needed to improve the real-time performance. In the previous research, the displacement signal generated by the grating encoder can be input into the FPGA through analog to digital converter (ADC) sampling, and then complete self-designed filter filtering, phase correction and displacement solution. In this paper, further, the ADC sampling rate adjustable interface is added to the FPGA, the global signal and the dc offset remove algorithm is added, and the displacement solution results in the form of fixed-point number are output to the host computer through the MicroBlaze (MB) soft core. MB core can realize process control and interface conversion on FPGA, and use a small amount of logic resources to replace the functions of MCU and DSP of traditional embedded measurement system, so as to further improve the integration of the instrument. A series of experiments are carried out on the two-phase FPGA platform. ADC sampling rate is 200ksps, 8-Channel synchronous parallel sampling, FPGA system clock frequency is 200MHz. The linear displacement table is set to drive the measurement grating at different displacement speeds, and the total stroke is set to 10mm. The FPGA real-time displacement solution platform is tested. The experimental results show that FPGA obtains accurate displacement solution results under different speed tests. In the test of 2 mm/s, the maximum cumulative displacement measurement error is 5um, which shows the real-time performance and accurate displacement solution performance of FPGA platform.

Frequency Modulated Eddy Current Displacement Sensor Based on FPGA

Design of a Digital Eddy Current Displacement Sensor Based on FPGA

Digital Capacitance Measurement System Based on FPGA

Design and Implementation of the Digital Detection Circuit for RFOG Based on a Single FPGA

Exploration of Vibration Signal Measurement Method of Automobile Parts Utilizing FPGA/Photoelectric Sensor

A Multi-Channel Borehole Strain Measurement and Acquisition System Based on FPGA

FPGA displacement calculation platform and test of two-phase grating interference encoder

Study of Fiber Grating Displacement Sensor

Design of A High-Precision Component-Type Vertical Pendulum Tiltmeter Based on FPGA

Pulsed Excitation and Dual-parameter Measurement Method for Eddy Current Sensor

Research on Rail Defect Detection System Based on FPGA

Hardware design of electrostatic levitation accelerometer control system

Design Of A Multi-Path Synchronous Frequency Meter With High Accuracy

An FPGA Platform for Next-Generation Grating Encoders

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

A noncontact FMCW radar sensor for displacement measurement in structural health monitoring

Design of multi-channel synchronization signal acquisition method based on FPGA

The Design of Adaptive Digital Sensor Based on FPGA

Digital servo system based on FPGA for optically pumped magnetometer

Design and Implementation of Robot Odometer Based on Multi-Sensor Data Fusion

Front-end Design of High Precision Displacement Sensor Based on Linear Array CCD